锂离子电池负极材料磷酸钛锂研究进展

Abstract

Abstract:

As a novel anode material for lithium-ion batteries,NASICON-type structure lithium titanium phosphate[LiTi₂（PO₄）₃] has been regarded as the most promising anode material due to its advantages such as environmental friendliness,good cycling performance and excellent thermal stability.LiTi₂（PO₄）₃ has a theoretical specific capacity of 138 mA·h/g and a stable voltage plateau of 2.5 V.However,the low electronic conductivity and low lithium-ion diffusion coefficient of LiTi₂（PO₄）₃ restrict its practical application.Thus,as response to the above shortcomings,many researchers modified LiTi₂（PO₄）₃ to greatly improve its electronic conductivity and lithium-ion diffusion coefficient.The structure and performance characteristics of LiTi₂（PO₄）₃ were presented briefly.The research progress on preparation and modification methods in recent years were mainly reviewed.Finally,the problems of LiTi₂（PO₄）₃ materials in current research were pointed out and its future application prospect was also forecasted.

Key words: lithium-ion batteries, lithium titanium phosphate, anode materials

CLC Number:

TQ131.11

Ye Jiaming,Li Changming. Research progress on anode material LiTi₂（PO₄）₃ for lithium-ion batteries[J]. Inorganic Chemicals Industry, 2019, 51(5): 17-22.

References 34

[1]	Liu X H, Saito T, Doi T , et al. Electrochemical properties of rechargeable aqueous lithium ion batteries with an olivine-type cathode and a Nasicon-type anode[J]. Journal of Power Sources,2009,189(1):706-710. doi: 10.1016/j.jpowsour.2008.08.050
[2]	张克杰, 陈鹏, 谢旺旺 , 等. 磷酸铁锂优缺点及改性研究进展[J]. 无机盐工业, 2018,50(6):13-17.
[3]	Liu Z, Qin X, Xu H , et al. One-pot synjournal of carbon-coated nano-sized LiTi₂(PO₄)₃ as anode materials for aqueous lithium ion batteries[J]. Journal of Power Sources, 2015,293:562-569. doi: 10.1016/j.jpowsour.2015.05.092
[4]	李卫, 田文怀, 其鲁 . 锂离子电池正极材料技术研究进展[J]. 无机盐工业, 2015,47(6):1-5.
[5]	Yu S, Tempel H, Schierholz R , et al. LiTi₂(PO₄)₃/C anode material with a spindle-like morphology for batteries with high rate capability and improved cycle life[J]. Chem.Electro.Chem., 2016,3(7):1157-1169. doi: 10.1210/mend-3-7-1157 pmid: 2797006
[6]	谢元, 李俊华, 王佳 , 等. 锂离子电池三元正极材料的研究进展[J]. 无机盐工业, 2018,50(7):18-22.
[7]	Wang H, Huang K, Zeng Y , et al. Electrochemical properties of TiP₂O₇ and LiTi₂(PO₄)₃ as anode material for lithium ion battery with aqueous solution electrolyte[J]. Electrochimica Acta, 2007,52(9):3280-3285. doi: 10.1016/j.electacta.2006.10.010
[8]	Luo J Y, Xia,Y Y . Aqueous lithium-ion battery LiTi₂(PO₄)₃/LiMn₂O₄ with high power and energy densities as well as superior cycling stability[J]. Advanced Functional Materials, 2007,17(18):3877-3884. doi: 10.1002/(ISSN)1616-3028
[9]	袁铮, 崔永丽, 沈明芳 , 等. LiTi₂(PO₄)₃/C复合材料的制备及电化学性能[J]. 物理化学学报, 2012,28(5):1169-1176. doi: 10.3866/PKU.WHXB201203012
[10]	Aravindan V, Chuiling W, Madhavi S . Electrochemical performance of NASICON type carbon coated LiTi₂(PO₄)₃ with a spinel LiMn₂O₄ cathode[J]. RSC Advances, 2012,2(19):7534-7539. doi: 10.1039/c2ra20826a
[11]	Aravindan V, Ulaganathan M, Ling W C , et al. Fabrication of new 2.4 V lithium-ion cell with carbon-coated LiTi₂(PO₄)₃ as the cathode[J]. Chem.Electro.Chem., 2015,2(2):231-235. doi: 10.1002/celc.201402371
[12]	Aravindan V, Ling W C, Hartung S , et al. Carbon-coated LiTi₂(PO₄)₃:An ideal insertion host for lithium-ion and sodium-ion batteries.[J]. Chemistry-An Asian Journal, 2014,9(3):878-882. doi: 10.1002/asia.201301461
[13]	Aravindan V, Chuiling W, Reddy M V , et al. Carbon coated nano-LiTi₂(PO₄)₃ electrodes for non-aqueous hybrid supercapacitors[J]. Physical Chemistry Chemical Physics Pccp, 2012,14(16):5808-5814. doi: 10.1039/c2cp40603a pmid: 22434062
[14]	Arun N, Aravindan V, Ling W C , et al. ChemInform abstract:Carbon coated LiTi₂(PO₄)₃ as new insertion anode for aqueous Na-ion batteries.[J]. Journal of Alloys & Compounds, 2014,603(29):48-51.
[15]	Yue Y, Pang W . Hydrothermal synjournal and characterization of LiTi₂(PO₄)₃[J]. Journal of Materials Science Letters, 1990,9(12):1392-1392. doi: 10.1007/BF00721592
[16]	Liang Y, Hisamo T, Sumi S , et al. Direct fabrication of thin-film LiTi₂(PO₄)₃ electrodes using the hydrothermal method[J]. Solid State Ionics, 2016,296:7-12.
[17]	Xu Y, Xu C, An Q , et al. Robust LiTi₂(PO₄)₃ microflowers as high-rate and long-life cathodes for Mg-based hybrid-ion batteries[J]. Journal of Materials Chemistry A, 2017,5(27):13950-13956.
[18]	Deng W, Wang X, Liu C , et al. Touching the theoretical capacity:Synthesizing cubic LiTi₂(PO₄)₃/C nanocomposites for high-perfor-mance lithium-ion battery[J]. Nanoscale, 2018,10(14):6282-6287. doi: 10.1039/C7NR09684D pmid: 29569675
[19]	Roh H K, Kim H K, Roh K C , et al. LiTi₂(PO₄)₃/reduced graphene oxide nanocomposite with enhanced electrochemical performance for lithium-ion batteries[J]. RSC Advances, 2014,4(60):31672-31677. doi: 10.1039/C4RA04943H
[20]	Sun J, Sun Y, Gai L , et al. Carbon-coated mesoporous LiTi₂(PO₄)₃nanocrystals with superior performance for lithium-ion batteries[J]. Electrochimica Acta, 2016,200:66-74. doi: 10.1016/j.electacta.2016.03.071
[21]	李淑瑜, 周晓亮, 马林 , 等. 锂离子电池电极材料 LiTi₂(PO₄)₃的纤维模板法制备微结构和电化学性能研究[J]. 电子显微学报, 2015,34(5):382-387.
[22]	Liu L, Song T, Han H , et al. Electrospun Sn-doped LiTi₂(PO₄)₃/C nanofibers for ultra-fast charging and discharging[J]. Journal of Materials Chemistry A, 2015,3(19):10395-10402.
[23]	Zhou Z, Luo W, Huang H , et al. LiTi₂(PO₄)₃@carbon/graphene hybrid as superior anode materials for aqueous lithiumion batteries[J]. Ceramics International, 2017,43(1):99-105.
[24]	He Z, Jiang Y, Meng W , et al. Advanced LiTi₂(PO₄)₃@N-doped carbon anode for aqueous lithium ion batteries[J]. Electrochimica Acta, 2016,222:1491-1500.
[25]	Sun W, Liu J, Liu X , et al. Bimolecular-induced hierarchical nano-porous LiTi₂(PO₄)₃/C with superior high-rate and cycling performance[J]. Chemical Communications, 2017,53(62):8703-8706. doi: 10.1039/c7cc04432a pmid: 28722073
[26]	申亚举 . 水系锂离子电池负极材料LiTi₂(PO₄)₃的制备及性能研究[D]. 沈阳:沈阳理工大学, 2015.
[27]	赵平, 文越华, 程杰 , 等. 水系锂离子电池负极材料LiTi₂(PO₄)₃/C的合成与电化学性能[J]. 高等学校化学学报, 2015,36(6):1180-1186.
[28]	Bounar N, Benabbas A, Ropa P , et al. Synjournal and ionic conduc-tivity of NASICON-structured LiTi₂-_xSn_x(PO₄)₃ anode material for lithium-ion batteries[J] Advances in Materials and Processing Technologies, 2017,3(3):241-249. doi: 10.1021/acsami.0c00712 pmid: 32237733
[29]	Wang H, Zhang H, Cheng Y , et al. Rational design and synjournal of LiTi₂(PO₄)₃-_xF_x anode materials for high-performance aqueous lithi-um ion batteries[J]. Journal of Materials Chemistry A, 2017,5(2):593-599. doi: 10.1039/C6TA08257B
[30]	He Z, Jiang Y, Zhu J , et al. Boosting the performance of LiTi₂(PO₄)₃/Canode for aqueous lithium ion battery by Sn doping on Ti sites[J]. Journal of Alloys and Compounds, 2018,731:32-38. doi: 10.1016/j.jallcom.2017.10.038
[31]	Liu N, He Z, Zhang X , et al. Synjournal and electrochemical properties of Na-doped LiTi₂(PO₄)₃@carbon composite as anode for aqueous lithium ion batteries[J]. Ceramics International, 2017,43(14):11481-11487. doi: 10.1016/j.ceramint.2017.05.322
[32]	Ma Q, Xu Q, Tsai C L , et al. A Novel sol-gel method for large-scale production of nanopowders：Preparation of Li_1.5Al_0.5Ti_1.5（PO₄）₃ as an example[J]. Journal of the American Ceramic Society, 2016,99(2):410-414.
[33]	Ortiz G F, López M C, Lavela P , et al. Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping[J]. Solid State Ionics, 2014,262:573-577.
[34]	Zhang P, Matsui M, Takeda Y , et al Water-stable lithium ion conducting solid electrolyte of iron and aluminum doped NASICON-type LiTi₂(PO₄)₃[J]. Solid State Ionics, 2014,263:27-32.

National Inorganic Salts Information Center

Inorganic Acid-Base-Salt Committee of CIESC

Research progress on anode material LiTi₂（PO₄）₃ for lithium-ion batteries

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 34

Related Articles 15

Metrics

Comments

Recommended 0

[1]	ZHANG Shanshan, ZENG Yule, ZHANG Ting, LIN Sen, LIU Chenglin. Research progress of cathode pre-lithiation technology for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2025, 57(1): 1-13.
[2]	TIAN Peng, ZHANG Haoran, XU Jingang, MOU Chenxi, XU Qianjin, NING Guiling. Study on aluminum sol modified anode and cathode materials for lithium ion batteries [J]. Inorganic Chemicals Industry, 2024, 56(9): 44-53.
[3]	LI Yaguang, HAN Dongzhan, QI Lijuan. Recent research on pretreatment of waste lithium-ion batteries and electrolyte recovery technology [J]. Inorganic Chemicals Industry, 2024, 56(2): 1-10.
[4]	LIU Juan, JIANG Qinglai, ZHANG Yueyi. Study on Al-Zn co-doping of 4.6 V high voltage lithium cobalt oxide cathode materials [J]. Inorganic Chemicals Industry, 2024, 56(11): 59-64.
[5]	ZHOU Shiyu,HE Ting,FU Tongtong,GUO Zirui,GU Shuai,YU Jianguo. Life cycle and economic assessment of recycling spent lithium-ion batteries with hydrometallurgical process [J]. Inorganic Chemicals Industry, 2023, 55(1): 26-32.
[6]	LI Fangkun,WANG Xinyi,XU Xijun,WU Yiwen,YANG Yan,LIU Jun. Nanoconfined encapsulation of iron-germanium alloy anode and its lithium ion storage performance [J]. Inorganic Chemicals Industry, 2022, 54(4): 88-93.
[7]	HE Ting,KONG Jiao,CUI Jingzhi,CHEN Zhihao,FU Tongtong,GUO Zirui,GU Shuai,YU Jianguo. Study on leaching and thermodynamic of spent lithium-ion batteries with electrochemical reduction [J]. Inorganic Chemicals Industry, 2022, 54(12): 34-43.
[8]	HUANG Liying,LU Dongchu,NING Yuxue,HU Tingting,CHEN Qing,HUANG Guoxin,SU Jing,WEN Yanxuan. Preparation and electrochemical performance of Nb-doped LiNiO₂ cathode material for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2022, 54(11): 52-58.
[9]	WANG Wei,LIU Wei,WU Yang,YANG Shenshen. Research progress on molybdenum disulfide-based anode materials for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2022, 54(10): 87-95.
[10]	Zhao Duan,Zhou Geng,Hou Shunli,Lan Ziwei,Zhang Jianru,Li Jian,Wang Jiatai. Research progress of coating modification of high nickel ternary materials for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2021, 53(8): 1-7.
[11]	Zhang Ting,Lin Sen,Yu Jianguo. Research progress in synthesis and performance enhancement of LiFePO₄ cathode materials [J]. Inorganic Chemicals Industry, 2021, 53(6): 31-40.
[12]	Zhang Kai,Jiang Ao. Preparation and properties of spherical LiMnPO₄/C cathode materials by spray drying method [J]. Inorganic Chemicals Industry, 2021, 53(1): 54-58.
[13]	Long Yunfei,Su Jing,Lü Xiaoyan,Wen Yanxuan. Advances in transition metal fluoride phosphate cathode materials for lithium-ion batteries and sodium-ion batteries [J]. Inorganic Chemicals Industry, 2020, 52(3): 28-34.
[14]	Zhou Qiong,Du Shaolin,Xie Yinghao. Study on properties of lithium battery recycled graphite reinforced cement [J]. Inorganic Chemicals Industry, 2020, 52(11): 64-68.
[15]	ZHANG Qiang, AI Chang-Chun, LIU Yang, HU Yi, ZHANG Rui, TIAN Qi-Feng. Research advances in synthesis of cobalt oxide cathode material for lithium-ion batteries [J]. INORGANICCHEMICALSINDUSTRY, 2014, 46(3): 67-.

Research progress on anode material LiTi2（PO4）3 for lithium-ion batteries