无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2014, Vol. 46 ›› Issue (6): 31-.

• 论文 • 上一篇    下一篇

微波水热法用于制备纳米氧化锌粉体的研究

赵志雄1,2,唐有根1,包巨南2,何灏彦2   

  1. 1.中南大学化学化工学院,湖南长沙 410083;2.湖南化工职业技术学院化工系
  • 发布日期:2014-06-09

Study on preparation of ZnO nanopowder by microwave-hydrothermal method

Zhao Zhixiong1,2,Tang Yougen2,Bao Junan1,He Haoyan1   

  1. 1.College of Chemistry and Chemical Engineering,Central South University,Changsha 410083,China;
    2.Department of Chemical Engineering,Hunan Chemical Vocational Technology College
  • Published:2014-06-09

摘要: 以氯化锌和氢氧化钠为原料,采用微波水热法制备了纳米氧化锌粉体,并采用X射线衍射(XRD)和透射电镜(TEM)对粉体的粒度、形貌、纯度进行了表征。通过单因素实验考察了反应温度、微波反应时间、微波功率、锌离子与氢氧根的浓度比等因素对氧化锌粉体的产率和粒径的影响,再通过正交试验得到最优制备条件。最佳制备工艺条件:锌离子与氢氧根的浓度比为1∶1.2、反应温度为 120 ℃、反应时间为 10 min、微波功率为500 W。在此条件下所得氧化锌粉体的晶型为六方晶相,产率达到93.5%,平均粒度约70 nm,粒径分布较窄,结晶完整。

关键词: 纳米氧化锌, 微波水热法, 制备

Abstract: A process of microwave-hydrothermal method was established to synthesize ZnO nanopowders,using zinc chloride and sodium hydroxide as raw materials.Besides,the particle size,morphology,and purity of the prepared product were characterized by X-ray diffraction(XRD) and transmission electron microscope(TEM).The influences of reaction temperature,microwave  radiation period,microwave power,and concentration ratio of Zn2+ to OH- on yield and size of ZnO nanopowders were investigated by single factor experiments and the optimum preparation conditions were obtained by orthogonal experiments.Experiment results indicated that: under the temperature of 120 ℃,c(Zn2+)∶c(OH-)=1∶1.2,microwave radiation period of 10 min,and microwave power of 500 W,nano-sized ZnO with an average size of 70 nm,belonging to hexagonal system,could be produced and the yield reached 93.5%.Moreover,the crystallite sizes of the prepared samples were mostly uniform with narrow size distribution.

Key words: nano-sized ZnO, microwave-hydrothermal method, preparation

中图分类号: