无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2014, Vol. 46 ›› Issue (5): 23-.

• 论文 • 上一篇    下一篇

钛矿或钛渣对偏钛酸的影响

邱 赟,李易英,秦剑锋,吴 涛,廖 欣   

  1. 重庆普源化工工业有限公司,重庆 401221
  • 出版日期:2014-05-10 发布日期:2014-05-07

Influence of titanium mineral or titania slag on metatitanic acid

 QIU   Bin, LI  Yi-Ying, QIN  Jian-Feng, WU   Tao, LIAO   Xin   

  1. Chongqing Puyuan Chemical Industry Co.,Ltd.,Chongqing 401221,China
  • Published:2014-05-10 Online:2014-05-07

摘要: 选取钛渣与钛矿,采用硫酸法钛白的相关制备过程,在相同条件下制备出一系列偏钛酸。对钛矿和钛渣进行XRD、SEM分析,并对所制备出的脱硝催化剂专用钛白粉原材料—偏钛酸的比表面积、粒径等做了分析。结果表明,钛渣制备的偏钛酸比钛矿制备的偏钛酸晶粒度小,团聚程度较低,比表面积小,更适合应用于制备脱硝催化剂专用的纳米二氧化钛。

关键词: 钛矿, 钛渣, 钛白粉, 偏钛酸

Abstract: With titania slags and titanium minerals as raw materials,a series of metatitanic acid were prepared under the same conditions through some processes related to the preparation of TiO2 by sulfuric acid method.The titanium minerals and titania slags were analyzed by XRD and SEM.The specific surface area and particle size of the prepared metatitanic acid:the raw materials of TiO2 used for de-NOx catalyst were also analyzed.Results showed that the metatitanic acid made by titania slags was with smaller particle size,lower degree of agglomeration,and lower specific surface area than that made by titanium minerals. Therefore,it is more suitable for producing nano-sized TiO2 in making de-NOx catalyst.

Key words: titanium mineral, titania slag, TiO2, metatitanic

中图分类号: