无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2012, Vol. 44 ›› Issue (11): 5-.

• 论文 • 上一篇    下一篇

燃烧合成氮化硅陶瓷晶须研究进展

罗珊珊1,李文魁2   

  1. 1.江西科技师范学院,江西南昌 330013;2.江西省材料表面工程重点实验室
  • 出版日期:2012-11-10 发布日期:2012-11-09

Research progress in preparation of silicon nitride whiskers by combustion synthesis

Luo Shanshan1,Li Wenkui2   

  1. 1.Jiangxi Science & Technology Normal University,Nanchang 330013,China;
    2.Jiangxi Key Laboratory of Surface Engineering
  • Online:2012-11-10 Published:2012-11-09

摘要: 燃烧合成法是一种高效能、低消耗的陶瓷材料合成方法。简要介绍了燃烧合成方法特点,评述了近年来燃烧合成氮化硅陶瓷晶须的研究进展,详细总结了原料选择、多种添加剂(如铁、稀土氧化物、铵盐等)对氮化硅晶须最终形貌和性能的影响, 总结了工艺参数,尤其是氮气压力和堆积密度对晶须生长的影响,并详细讨论了在燃烧合成过程中晶须的生长机理。

关键词: 燃烧合成, 氮化硅, 晶须, 晶体生长

Abstract: Combustion synthesis is a high efficient and low cost synthesis method for ceramic materials.The characteristics of combustion synthesis were briefly introduced,and the research progress in silicon nitride whiskers prepared by combustion synthesis in recent years was reviewed.The effects of raw material selection and additives(such as Fe,rare earth oxide,and ammonium salt) on final morphology and properties of silicon nitride whiskers were investigated.Furthermore,the influences of process parameters,especially the nitrogen pressure and bulk density on whiskers growing were discussed.The possible whiskers growing mechanism during the combustion synthesis process was also discussed in detail.

Key words: combustion synthesis, silicon nitride, whiskers, crystals growing

中图分类号: