无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2012, Vol. 44 ›› Issue (2): 20-.

• 论文 • 上一篇    下一篇

硼氢化钠在氢氧化钠溶液中的密度和黏度

陶 松1,2,房春晖1,周永全1,房 艳1,朱发岩1,2,许 沙1,2   

  1. 1.中国科学院盐湖资源与化学重点实验室,中国科学院青海盐湖研究所,青海西宁 810008;2.中国科学院研究生院
  • 出版日期:2012-02-10 发布日期:2012-02-13

Density and viscosity of sodium borohydride in aqueous sodium hydroxide solution

Tao Song1,2,Fang Chunhui1,Zhou Yongquan1,Fang Yan1,Zhu Fayan1,2,Xu Sha1,2   

  1. 1.Key Laboratory of Salt Lake Resources and Chemistry,Qinghai Institute of Salt Lakes,Chinese Academy of Sciences,Xining 810008,China;2.Graduate University,Chinese Academy of Sciences
  • Online:2012-02-10 Published:2012-02-13

摘要: 在291、298、303 K下,将不同质量的硼氢化钠固体分别加入到质量分数为13.35%的氢氧化钠溶液中,用密度瓶法和Ubbelohde黏度管分别测量溶液密度和黏度。根据溶液的密度计算硼氢化钠溶液的表观摩尔体积,讨论浓度的变化对混合溶液密度的影响,可知随着硼氢化钠浓度的加大,密度逐渐减小。根据溶液黏度数据和BH4- 半径计算了不同温度下硼氢化钠和BH4- 的黏度系数B,结果表明,BH4- 是结构促进型离子,且随着温度升高,黏度系数B逐渐减小。

关键词: 硼氢化钠, 氢氧化钠, 密度, 黏度

Abstract: Sodium borohydride with different weights were put into sodium hydroxide solution with mass fraction of 13.35% at 291,298,303 K respectively.Density and viscosity of the mix solutions were determined by pycnometer method and Ubbe-lohde-type glass capillary tube viscosimeter respectively.Then apparent mole volume could be calculated in accordance with the density of the mixed solutions and the influence of concentration changing on the density of mixed solution was discussed.Result showed that the density of the mixed solutions decreased when the concentration of sodium borohydride increased.The viscosity coeffcients (B) of sodium borohydrideand borohydride ion(BH4- ) were also calculated according to the viscosity of the mixed solutions and radius of borohydrideion.It was demonstrated that borohydride ion was structure making ion and the coefficient B of the mixed solutions reduced gradually with temperature increasing.

Key words: sodium borohydride, sodium hydroxide, density, viscosity

中图分类号: