无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2011, Vol. 43 ›› Issue (6): 53-.

• 论文 • 上一篇    下一篇

回收磷化工废液中的氟制备氟化钠

胡震   

  1. 四川理工学院材料与化学工程学院,四川自贡 643000
  • 出版日期:2011-06-10 发布日期:2011-06-14

Preparation of sodium fluoride by recovering fluorine from waste liquid in phosphate chemical industry

 HU  Zhen   

  1. School of Materials and Chemical Engineering,Sichuan University of Science & Engineering,Zigong 643000,China
  • Published:2011-06-10 Online:2011-06-14

摘要: 以磷化工行业产生的含氟废液中的氟和磷酸三钠为原料制备氟化钠,考察了原料配比、反应温度、反应时间、搅拌速率对氟化钠生成量的影响。最佳工艺条件:磷酸三钠与氟化铵物质的量比为1.4,反应温度为95 ℃,反应时间为60 min,搅拌速率为350 r/min。在最佳条件下,用100 g废液可以制得4.02 g氟化钠,废液中氟的回收率达到85%。

关键词: 磷化工废液, 氟资源回收, 氟化钠

Abstract: Sodium fluoride was prepared with trisodium phosphate and fluorine in the waste liquid from phosphate chemical industry as raw materials.Influences of various factors,such as mix ratio of raw materials (amount-of-substance ratio of trisodium phosphate to ammonium fluoride),reaction temperature,reaction time,and stirring speed,on yield of sodium fluoride were investigated.Optimum conditions were as follows:amount-of-substance ratio of trisodium phosphate to ammonium fluoride was 1.4,reaction time was 60 min,reaction temperature was 95 ℃,and stirring speed was 350 r/min.Under the optimum conditions,yield of sodium fluoride was 4.02 g per 100 g waste liquid,and the recovery rate of fluorine in waste liquid reached 85%. 

Key words: waste liquid in phosphate chemical industry, fluorine resource recovery, sodium fluoride

中图分类号: