Inorganic Chemicals Industry ›› 2021, Vol. 53 ›› Issue (8): 112-116.doi: 10.19964/j.issn.1006-4990.2020-0543

• Catalytic Materials • Previous Articles    

Study on deactivation effect of chromium on industrial V-Mo/Ti De-NOx catalyst

Huang Li1(),Wang Hu1,Zong Yuhao1,Chang Zhengfeng1,Liu Yang1,Li Jinke1,Han Pei2()   

  1. 1. Datang Nanjing Environmental Protection Technology Co.,Ltd,Nanjing 211111,China
    2. Instrumental Analysis Center,Inner Mongolia University of Science & Technology
  • Received:2020-10-11 Online:2021-08-10 Published:2021-08-11
  • Contact: Han Pei E-mail:huangl@dteg.com.cn;solidking@163.com

Abstract:

Industrial V-Mo-Cr/Ti catalysts loaded with different amounts of Cr2O3 were prepared by impregnation method.XRD,N2-adsorption,NH3-TPD,Raman,H2-TPR and XPS were used to characterize the catalysts.Afterwards,the denitri-fication performance of the different catalysts was tested through a fixed-bed microreactor.It was found that Cr2O3 loaded on industrial V-Mo/Ti denitration catalysts had little impact on the pore properties of catalyst.By comparison with V-Mo/Ti cat-alyst,V-Mo-Cr/Ti catalyst presented more amount of acid sites.However,due to the influence of Cr2O3,the reduction perfor-mance of the catalyst was lower and the content of chemical adsorbed oxygen was less.V-Mo-Cr/Ti catalysts exhibited relative lower NOx conversion and higher N2O generation in the temperature range of 250 ℃ to 430 ℃ than that of the V-Mo/Ti cata-lyst.

Key words: selective catalytic reduction, V-Mo/Ti, chromium oxide, denitration catalyst

CLC Number: