锂离子电池高镍三元材料的包覆改性研究进展

doi:10.19964/j.issn.1006-4990.2020-0503

Abstract

Abstract:

High nickel ternary materials for lithium-ion batteries have become the preferred cathode materials for electric ve-hicles and portable electronic devices due to the advantages of long cycle life,environmental protection and low cost.However,increase of nickel content tends to make surface structure of materials unstable and increase side reaction of the interface,which leads to decrease of the cycle performance of materials.In this paper,the modification research of high nickel ternary materials from two aspects of single-layer and double-layer coating was reviewed and the influence of different coating materials on electrochemical performance was introduced.Double-layer coating could better improve the electrochemical performance of high nickel ternary materials,but the removal of HF still needs to be studied.

Key words: lithium-ion batteries, high nickel ternary materials, coating modification

CLC Number:

TQ131.11

Zhao Duan,Zhou Geng,Hou Shunli,Lan Ziwei,Zhang Jianru,Li Jian,Wang Jiatai. Research progress of coating modification of high nickel ternary materials for lithium-ion batteries[J]. Inorganic Chemicals Industry, 2021, 53(8): 1-7.

Figures/Tables 2

References 39

[1]	Kim T, Song W T, Son D Y, et al. Lithium-ion batteries:Outlook on present,future,and hybridized technologies[J]. Journal of Materials Chemistry A, 2019, 7(7):2942-2964. doi: 10.1039/C8TA10513H
[2]	Armand M, Tarascon J M. Building better batteries[J]. Nature, 2008, 451(7179):652-657. doi: 10.1038/451652a
[3]	Yoon C S, Ryu H H, Park G T, et al. Extracting maximum capacity from Ni-rich Li[Ni_0.95Co_0.025Mn_0.025]O₂ cathodes for high-energy-den-sity lithium-ion batteries[J]. Journal of Materials Chemistry A, 2018, 6(9):4126-4132. doi: 10.1039/C7TA11346C
[4]	Whitfield P S, Davidson I J, Cranswick L M D, et al. Investigation of possible superstructure and cation disorder in the lithium battery cathode material LiMn_1/3Ni_1/3Co_1/3O₂ using neutron and anomalous dispersion powder diffraction[J]. Solid State Ionics, 2005, 176(5/6):463-471. doi: 10.1016/j.ssi.2004.07.066
[5]	Zheng J, Kan W H, Manthiram A. Role of Mn content on the electro-chemical properties of nickel-rich layered LiNi_0.8-_xCo_0.1Mn_0.1+_xO₂(0.0≤x≤0.08) cathodes for lithium-ion batteries[J]. ACS Applied Mate-rials & Interfaces, 2015, 7(12),6926-6934.
[6]	Sun H H, Choi W, Lee J K, et al. Control of electrochemical proper-ties of nickel-rich layered cathode materials for lithium ion batteries by variation of the manganese to cobalt ratio[J]. Journal of Power Sources, 2015, 275:877-833. doi: 10.1016/j.jpowsour.2014.11.075
[7]	Gong J, Wang Q, Sun J. Thermal analysis of nickel cobalt lithium manganese with varying nickel content used for lithium ion batteri-es[J]. Thermochimica Acta, 2017, 655:176-180. doi: 10.1016/j.tca.2017.06.022
[8]	Xu J, Lin F, Doeff M M, et al. A review of Ni-based layered oxides for rechargeable Li-ion batteries[J]. Journal of Materials Chemistry A, 2017, 5(3):874-901. doi: 10.1039/C6TA07991A
[9]	Lee J, Urban A, Li X, et al. Unlocking the potential of cation-disor-dered oxides for rechargeable lithium batteries[J]. Science, 2014, 343(6170):519-522. doi: 10.1126/science.1246432
[10]	Kim N Y, Yim T, Song J H, et al. Microstructural study on degrada-tion mechanism of layered LiNi_0.6Co_0.2Mn_0.2O₂ cathode materials by analytical transmission electron microscopy[J]. Journal of Power Sources, 2016, 307:641-648. doi: 10.1016/j.jpowsour.2016.01.023
[11]	Kim J, Lee H, Cha H, et al. Nickel-rich cathodes:Prospect and re-ality of Ni-rich cathode for commercialization[J]. Advanced Energy Materials, 2018, 8(6).Doi: 10.1002/aenm.201870023.
[12]	Lu J, Peng Q, Wang W, et al. Nanoscale coating of LiMO₂(M=Ni,Co,Mn) nanobelts with Li⁺-conductive Li₂TiO₃:Toward better rate capabilities for Li-ion batteries[J]. Journal of the American Che-mical Society, 2013, 135(5):1649-1652.
[13]	Cho D H, Jo C H, Cho W, et al. Effect of residual lithium compo-unds on layer Ni-rich Li[Ni_0.7Mn_0.3]O₂[J]. Journal of the Electro-chemical Society, 2014, 161(6):A920-A926. doi: 10.1149/2.042406jes
[14]	Dong S, Zhou Y, Hai C, et al. Ultrathin CeO₂ coating for improved cycling and rate performance of Ni-rich layered LiNi_0.7Co_0.2Mn_0.1O₂ cathode materials[J]. Ceramics International, 2019, 45(1):144-152. doi: 10.1016/j.ceramint.2018.09.145
[15]	Wang J, Du C, Yan C, et al. Al₂O₃ coated concentration-gradient Li[Ni_0.73Co_0.12Mn_0.15]O₂ cathode material by freeze drying for long-life lithium ion batteries[J]. Electrochimica Acta, 2015, 174:1185-1191. doi: 10.1016/j.electacta.2015.06.112
[16]	Gan Z, Hu G, Peng Z, et al. Surface modification of LiNi_0.8Co_0.1Mn_0.1O₂ by WO₃ as a cathode material for LIB[J]. Applied Surface Science, 2019, 481:1228-1238. doi: 10.1016/j.apsusc.2019.03.116
[17]	Xiong X, Ding D, Wang Z, et al. Surface modification of LiNi_0.8Co_0.1Mn_0.1O₂ with conducting polypyrrole[J]. Journal of Solid State Electrochemistry, 2014, 18(9):2619-2624. doi: 10.1007/s10008-014-2519-7
[18]	Chen G, Peng B, Han R, et al. A robust carbon coating strategy to-ward Ni-rich lithium cathodes[J]. Ceramics International, 2020.Doi: 10.1016/j.ceramint.2020.05.160.
[19]	Huang Y, Xia J, Hu G, et al. Conductive cyclized polyacrylonitrile coated LiNi_0.6Co_0.2Mn_0.2O₂ cathode with the enhanced electrochemi-cal performance for Li-ion batteries[J]. Electrochimica Acta, 2020, 332.Doi: 10.1016/j.electacta.2019.135505.
[20]	Wang D, Li X, Wang W, et al. Improvement of high voltage electro-chemical performance of LiNi_0.5Co_0.2Mn_0.3O₂ cathode materials via Li₂ZrO₃ coating[J]. Ceramics International, 2015, 41(5):6663-6667. doi: 10.1016/j.ceramint.2015.01.100
[21]	Zou P, Lin Z, Fan M, et al. Facile and efficient fabrication of Li₃PO₄-coated Ni-rich cathode for high-performance lithium-ion battery[J]. Applied Surface Science, 2020, 504.Doi: 10.1016/j.apsusc.2019.144506.
[22]	Huang X, Zhu W, Yao J, et al. Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li₂MnO₃ coating[J]. Journal of Materials Chemistry A, 2020, 8(34):17429-17441. doi: 10.1039/D0TA00924E
[23]	Qu X, Yu Z, Ruan D, et al. Enhanced electrochemical performance of Ni-rich cathode materials with Li_1.3Al_0.3Ti_1.7(PO₄)₃ coating[J]. ACS Sustainable Chemistry & Engineering, 2020, 8(15):5819-5830.
[24]	Zhao S Y, Zhu Y T, Qian Y C, et al. Annealing effects of TiO₂ coat-ing on cycling performance of Ni-rich cathode material LiNi_0.8Co_0.1Mn_0.1O₂ for lithium-ion battery[J]. Materials Letters,2020,265(Apra15):Doi:10.1016/j.matlet. 2020. 127418.
[25]	Li Q, Zhuang W, Li Z, et al. Realizing superior cycle stability of a Ni-rich layered LiNi_0.83Co_0.12Mn_0.05O₂ cathode with a B₂O₃ surface modification[J]. ChemElectroChem, 2020, 7(4):998-1006. doi: 10.1002/celc.v7.4
[26]	Zhao E Y, Chen M M, Hu Z B, et al. Improved cycle stability of hi-gh-capacity Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ at high cut-off voltage by Li₂SiO₃ coating[J]. Journal of Power Sources, 2017, 343:345-353. doi: 10.1016/j.jpowsour.2017.01.066
[27]	Wu J, Tan X, Zhang J, et al. Improvement of electrochemical perfor-mance of nickel rich LiNi_0.8Co0_.1Mn_0.1O₂ cathode by lithium alumi-nates surface modifications[J]. Energy Technology, 2019, 7(2):209-215. doi: 10.1002/ente.v7.2
[28]	Yang H, Du K, Hu G, et al. Graphene@TiO₂ co-modified LiNi_0.6Co_0.2Mn_0.2O₂ cathode materials with enhanced electrochemi-cal performance under harsh conditions[J]. Electrochimica Acta, 2018, 289:149-157. doi: 10.1016/j.electacta.2018.08.089
[29]	Kong J Z, Chen Y, Cao Y Q, et al. Enhanced electrochemical per-formance of Ni-rich LiNi_0.6Co_0.2Mn_0.2O₂ coated by molecular layer deposition derived dual-functional C-Al₂O₃ composite coating[J]. Journal of Alloys and Compounds, 2019, 799:89-98. doi: 10.1016/j.jallcom.2019.05.330
[30]	Guo S, Yuan B, Zhao H, et al. Dual-component Li_xTiO₂@silica funct-ional coating in one layer for performance enhanced LiNi_0.6Co_0.2Mn_0.2O₂ cathode[J]. Nano Energy, 2019, 58:673-679. doi: 10.1016/j.nanoen.2019.02.004
[31]	Liu Y, Tang L B, Wei H X, et al. Enhancement on structural stabi-lity of Ni-rich cathode materials by in-situ fabricating dual-modi-fied layer for lithium-ion batteries[J]. Nano Energy, 2019, 65.Doi: 10.1016/j.nanoen.2019.104043.
[32]	Liu W, Li X, Xiong D, et al. Significantly improving cycling perfor-mance of cathodes in lithium ion batteries:The effect of Al₂O₃ and LiAlO₂ coatings on LiNi_0.6Co_0.2Mn_0.2O₂[J]. Nano Energy, 2018, 44:111-120. doi: 10.1016/j.nanoen.2017.11.010
[33]	Ran Q, Zhao H, Hu Y, et al. Enhanced electrochemical performance of dual-conductive layers coated Ni-rich LiNi_0.6Co_0.2Mn_0.2O₂ cathodefor Li-ion batteries at high cut-off voltage[J]. Electrochimica Acta, 2018, 289:82-93. doi: 10.1016/j.electacta.2018.08.091
[34]	Yang H, Wu K P, Hu G R, et al. Design and synjournal of double-functional polymer composite layer coating to enhance the electro-chemical performance of the Ni-rich cathode at the upper cutoff voltage[J]. ACS Applied Materials & Interfaces, 2019, 11(8):8556-8566.
[35]	Li J, Liu Y, Yao W, et al. Li₂TiO₃ and Li₂ZrO₃ co-modification LiNi_0.8Co_0.1Mn_0.1O₂ cathode material with improved high-voltage cycling performance for lithium-ion batteries[J]. Solid State Ionics, 2020, 349.Doi: 10.1016/j.ssi.2020.115292.
[36]	Ma Y, Xu M, Zhang J, et al. Improving electrochemical performance of Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO₂[J]. Journal of Alloys and Compounds, 2020.Doi: 10.1016/j.jallcom.2020.156387.
[37]	Ju S H, Kang I S, Lee Y S, et al. Improvement of the cycling perfor-mance of LiNi_0.6Co_0.2Mn_0.2O₂ cathode active materials by a dual-con-ductive polymer coating[J]. ACS Applied Materials & Interfaces, 2014, 6(4):2546-2552.
[38]	Li L J, Xu M, Yao Q, et al. Alleviating surface degradation of nickel-rich layered oxide cathode material by encapsulating with nanosc-ale Li-ions/electrons superionic conductors hybrid membrane for advanced Li-ion batteries[J]. ACS Applied Materials & Interfaces, 2016, 8(45):30879-30889.
[39]	Liang L, Wu C, Sun X, et al. Sur-/interface engineering of hierarc-hical LiNi_0.6Co_0.2Mn_0.2O₂@LiCoPO₄@graphene architectures as pro-mising high-voltage cathodes toward advanced Li-ion batteries[J]. Advanced Materials Interfaces, 2017, 4(14).Doi: org/10.1002/admi.201770072.

National Inorganic Salts Information Center

Inorganic Acid-Base-Salt Committee of CIESC

Research progress of coating modification of high nickel ternary materials for lithium-ion batteries

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 2

References 39

Related Articles 15

Metrics

Comments

Recommended 0

[1]	LI Yaguang, HAN Dongzhan, QI Lijuan. Recent research on pretreatment of waste lithium-ion batteries and electrolyte recovery technology [J]. Inorganic Chemicals Industry, 2024, 56(2): 1-10.
[2]	ZHOU Shiyu,HE Ting,FU Tongtong,GUO Zirui,GU Shuai,YU Jianguo. Life cycle and economic assessment of recycling spent lithium-ion batteries with hydrometallurgical process [J]. Inorganic Chemicals Industry, 2023, 55(1): 26-32.
[3]	LI Fangkun,WANG Xinyi,XU Xijun,WU Yiwen,YANG Yan,LIU Jun. Nanoconfined encapsulation of iron-germanium alloy anode and its lithium ion storage performance [J]. Inorganic Chemicals Industry, 2022, 54(4): 88-93.
[4]	HE Ting,KONG Jiao,CUI Jingzhi,CHEN Zhihao,FU Tongtong,GUO Zirui,GU Shuai,YU Jianguo. Study on leaching and thermodynamic of spent lithium-ion batteries with electrochemical reduction [J]. Inorganic Chemicals Industry, 2022, 54(12): 34-43.
[5]	HUANG Liying,LU Dongchu,NING Yuxue,HU Tingting,CHEN Qing,HUANG Guoxin,SU Jing,WEN Yanxuan. Preparation and electrochemical performance of Nb-doped LiNiO₂ cathode material for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2022, 54(11): 52-58.
[6]	WANG Wei,LIU Wei,WU Yang,YANG Shenshen. Research progress on molybdenum disulfide-based anode materials for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2022, 54(10): 87-95.
[7]	Zhang Ting,Lin Sen,Yu Jianguo. Research progress in synthesis and performance enhancement of LiFePO₄ cathode materials [J]. Inorganic Chemicals Industry, 2021, 53(6): 31-40.
[8]	Zhang Kai,Jiang Ao. Preparation and properties of spherical LiMnPO₄/C cathode materials by spray drying method [J]. Inorganic Chemicals Industry, 2021, 53(1): 54-58.
[9]	Long Yunfei,Su Jing,Lü Xiaoyan,Wen Yanxuan. Advances in transition metal fluoride phosphate cathode materials for lithium-ion batteries and sodium-ion batteries [J]. Inorganic Chemicals Industry, 2020, 52(3): 28-34.
[10]	Zhou Qiong,Du Shaolin,Xie Yinghao. Study on properties of lithium battery recycled graphite reinforced cement [J]. Inorganic Chemicals Industry, 2020, 52(11): 64-68.
[11]	Ye Jiaming,Li Changming. Research progress on anode material LiTi₂（PO₄）₃ for lithium-ion batteries [J]. Inorganic Chemicals Industry, 2019, 51(5): 17-22.
[12]	WANG Di, DANG Ya-Gu, FEI De-Jun, SUN Xian. Preparation and mechanism analysis of silica-coated CaSO4 whisker [J]. INORGANICCHEMICALSINDUSTRY, 2016, 48(12): 37-.
[13]	ZHANG Qiang, AI Chang-Chun, LIU Yang, HU Yi, ZHANG Rui, TIAN Qi-Feng. Research advances in synthesis of cobalt oxide cathode material for lithium-ion batteries [J]. INORGANICCHEMICALSINDUSTRY, 2014, 46(3): 67-.
[14]	LI Jing, ZHANG Ying, HAN En-Shan, DU Feng-Juan. Preparation and performance of copper oxide as anode materials for lithium-ion batteries [J]. INORGANICCHEMICALSINDUSTRY, 2013, 45(2): 60-.
[15]	LIU Chao, LIU Hong-Guang, YE Xue-Hai, ZHI Xiao-Ke, HE Ai-Zhen, ZHAO Zhen, WANG Xu-Yang, ZHANG Su, SHI Jie. Influence of Co doping on electrochemical properties of Li_1.2Mn_0.6Ni_0.2O₂ [J]. INORGANICCHEMICALSINDUSTRY, 2013, 45(10): 60-.