无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2016, Vol. 48 ›› Issue (3): 39-.

• 论文 • 上一篇    下一篇

尿素水热法制备锌镁铝多元水滑石及形成机理

朱 建1,张秀芹2,金 吉1,王 凯2,陈 强2,俞 强1   

  1. 1.常州大学材料科学与工程学院,江苏常州 213164;2.常州南京大学高新技术研究院
  • 出版日期:2016-03-10 发布日期:2016-03-11

Synthesis of Zn-Mg-Al-CO3 LDHs with urea hydrothermal method and its formation mechanism

Zhu Jian1,Zhang Xiuqin2,Jin Ji1,Wang kai2,Chen Qiang2,Yu Qiang1   

  1. 1.School of Material Science & Engineering,Changzhou University,Changzhou 213164,China;
    2.High-Tech Research Institute of Nanjing University,Changzhou
  • Published:2016-03-10 Online:2016-03-11

摘要: 采用尿素水热法合成了锌镁铝多元水滑石ZnMgAl-CO3 LDHs。讨论了反应温度、反应时间、尿素用量、投料比对合成产物的影响,并探索了ZnMgAl-CO3 LDHs的形成机理。用X射线衍射仪(XRD)、扫描电镜(SEM)对合成产物进行了表征。研究表明:控制体系中n(M2+)∶n(M3+)=2∶1、n(尿素)∶[n(M2+)+n(M3+)]≥2∶1、反应温度为120 ℃、反应时间为48 h,可以获得晶形好、板层结构显著、晶相单一且高度分散的优质锌镁铝水滑石;锌镁铝水滑石的形成机理可以概括为尿素水解、碳酸锌沉淀、氢氧化铝沉淀、氢氧化锌及氢氧化镁沉淀、水解、沉淀成核、水滑石纳米片堆积、晶粒生长、晶体形成几个阶段;锌镁铝水滑石形貌转变过程可以概括为球形粒子、玫瑰花状、六方片状几个过程。

关键词: 锌镁铝多元水滑石, 合成, 表征, 形成机理

Abstract: The zinc magnesium aluminum hydrotalcite-like compound Zn-Mg-Al-LDHs were synthesized by urea hydrother- mal method.The effects of many conditions,such as hydrothermal temperature,reaction time,the amount of urea,and the mix ratios,on the product were investigated,and the formation mechanism was also explored.Hydrotalcite samples were characterized by X-ray diffraction(XRD) and scan electron microscope(SEM).Experiment results showed Zn-Mg-Al-LDHs with well-defined shape,obvious intercalated structure,uniform structure,and well-dispersing capability had been made when the preparation conditions were as follows:n(M2+)∶n(M3+)=2∶1,n(urea)∶[n(M2+)+n(M3+)]≥2,hydrothermal tempera- ture was 120 ℃,and reaction time was 48 h.The formation mechanism proposed for ZnMgAl-CO3 LDHs was the hydrolysis of urea,precipitation of zinc carbonate,precipitation of aluminum hydroxide,precipitation of zinc hydroxide and magnesium hydroxide,hydrolysis,precipitation nucleation,accumulation of hydrotalcite nano-pieces,crystal growth,and crystal formation. The characteristics of morphology transformation process included spherical particle,rosette,and six-party flake.

Key words: ZnMgAl-CO3 LDHs, synthesis, characterication, formation mechanism

中图分类号: