无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2016, Vol. 48 ›› Issue (8): 55-.

• 论文 • 上一篇    下一篇

湿法稀磷酸预处理实验研究

何宾宾1,2,张 晖1,周琼波1,2,方世祥1,2,傅 英1   

  1. 1.云天化集团云南磷化集团有限公司,云南昆明 650600;2.国家磷资源开发利用工程技术研究中心
  • 出版日期:2016-08-10 发布日期:2016-08-10

Experimental study on pretreatment of dilute wet process phosphoric acid

He Binbin1,2,Zhang Hui1,Zhou Qiongbo1,2,Fang Shixiang1,2,Fu Ying1   

  1. 1.Yunnan Phosphate Chemical Group Co.Ltd,Kunming 650600,China;2.National Engineering
    Research Center of phosphate Research Development and Utilization
  • Online:2016-08-10 Published:2016-08-10

摘要: 针对湿法磷酸生产过程中浓磷酸脱重(脱重金属)后过滤难等问题,提出陈化稀磷酸脱重-过滤-浓缩-脱氟-后续产品工艺。实验结果表明,当硫化钠加入量为计算量的11倍、反应温度为50 ℃、反应时间为30 min、搅拌速度为400 r/min时,脱重清酸中As的质量分数为7×10-6~8×10-6,达到1.0×10-5以下要求。

关键词: 湿法磷酸, 重金属, 硫化钠

Abstract: In allusion to the problems,such as the hard filtration of heavy metal-removed concentrated phosphoric acid in the process of wet process phosphoric acid production,the new technology‘Aged dilute phosphoric acid heavy metal removal-fil- tration-concentration-defluorination-subsequent product process’ was put forward.Results showed,when sodium sulfide dosage was 11 times of the calculation amount of computation,reaction temperature of 50 ℃,the reaction time of 30 min,and stirring speed of 400 r/min,the arsenic′s mass fraction in the clear heavy metal-removed acid was 7×10-6~8×10-6,met the re- quirement of below the 1.0×10-5.

Key words: wet process phosphoric acid, heavy metals, sodium sulfide

中图分类号: