无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2020, Vol. 52 ›› Issue (8): 46-50.doi: 10.11962/1006-4990.2019-0488

• 研究与开发 • 上一篇    下一篇

硅烷偶联剂改性玻璃纤维增强硅气凝胶的研究

赵洪凯(),刘明,刘一甫,许亚军,刘威   

  1. 吉林建筑大学材料科学与工程学院,吉林长春 130118
  • 收稿日期:2020-02-18 出版日期:2020-08-10 发布日期:2020-08-12
  • 作者简介:赵洪凯(1974— ),男,教授,硕士研究生导师,主要从事复合材料研究;E-mail: hkzhao003@126.com
  • 基金资助:
    吉林省发展和改革委员会产业技术研究与开发项目(2020C027-4);吉林省大学生创新创业训练计划项目(8570036506)

Study on glass fiber reinforced silica aerogel modified by silane coupling agent

Zhao Hongkai(),Liu Ming,Liu Yifu,Xu Yajun,Liu Wei   

  1. School of Materials Science and Engineering,Jilin Jianzhu University,Changchun 130118,China
  • Received:2020-02-18 Online:2020-08-10 Published:2020-08-12

摘要:

为了达到增强硅气凝胶力学性能的目的,采用硅烷偶联剂KH550与KH560二步改性接枝玻璃纤维,进而制备纤维增强硅气凝胶。利用扫描电子显微镜、红外光谱仪、比表面及孔径分布仪、热重-差热分析仪、导热系数仪、电子动静态疲劳试验机等对其表征。实验结果表明:硅烷偶联剂改性玻璃纤维与硅气凝胶复合后网络结构更加均匀、骨架强度更加稳定、孔径多在30 nm以下、具有良好的热稳定性;同时,改性玻璃纤维的最佳添加量为20%(质量分数),此时其密度为0.167 g/cm3,导热系数为0.018 5 W/(m·K),接触角为127°,抗弯强度为1.042 MPa,抗压强度为0.669 MPa,达到预期实验目的。

关键词: 羟基化, 玻璃纤维, 硅气凝胶, 硅烷偶联剂

Abstract:

In order to enhance the mechanical properties of silica aerogel,the silane coupling agent KH550 and KH560 were modified to grafted glass fibers in two steps,and then fiber reinforced silica aerogel were prepared.Scanning electron microscope,infrared spectrometer,specific surface and aperture distribution instrument,TG-DTA analyzer,thermal conductivity instrument and electronic dynamic and static fatigue testing machine were used to characterize the fiber reinforced silica aerogel.The results showed that after the glass fiber reinforced silica aerogel modified by silane coupling agent compounded with silica aerogel,the network structure was more uniform,the framework strength was more stable,the pore diameter was less than 30 nm,and the thermal stability was better.At the same time,the optimal addition amount of modified glass fiber was 20%(mass fraction).At this time,the density was 0.167 g/cm3,the thermal conductivity coefficient was 0.018 5 W/(m·K),the contact angle was 127°,the bending strength was 1.042 MPa and the compressive strength was 0.669 MPa.The expected purpose of the experiment was achieved.

Key words: hydroxylation, glass fiber, silica aerogel, silane coupling agent

中图分类号: