[1] |
SHI Wangfang, ZHANG Yongsheng.
Study on NO x degradation performance of concrete-based non-metallic boron doped nitrogen-rich carbon nitride
[J]. Inorganic Chemicals Industry, 2025, 57(3): 116-123.
|
[2] |
MAO Shize.
Study on microwave roasting-activated coal gangue to improve sulfate corrosion resistance of concrete
[J]. Inorganic Chemicals Industry, 2025, 57(3): 86-93.
|
[3] |
LIU Guangming.
Study on photocatalytic and mechanical properties of C3N5/NH2-MIL-125(Ti) modified concrete mortar
[J]. Inorganic Chemicals Industry, 2025, 57(1): 120-128.
|
[4] |
LIU Cijun, WU Ziyang, CHENG Shukai, CHEN Xuyong.
Effect of recycled fine aggregate on mechanical properties and autogenous shrinkage of ultra-high performance concrete
[J]. Inorganic Chemicals Industry, 2024, 56(9): 75-81.
|
[5] |
ZHANG Ruijun, CHEN Guoliang, SONG Chuncao, ZHU Yafei.
Effects of graphene oxide on mechanical properties and chloride penetration resistance of ultra⁃high performance concrete incorporating recycled sand
[J]. Inorganic Chemicals Industry, 2024, 56(8): 54-59.
|
[6] |
YE Fen, CHENG Hao, XIANG Yuan, LIU Song, SHI Wei.
Preparation of ceramic aggregate from electrolytic manganese slag and its application in concrete
[J]. Inorganic Chemicals Industry, 2024, 56(6): 127-132.
|
[7] |
LI Keke, XUE Jiangwei, WANG Luwei, GUAN Xuemao.
Effect of MgAl-layered double hydroxides on properties of high-iron low-calcium portland cement
[J]. Inorganic Chemicals Industry, 2024, 56(4): 57-63.
|
[8] |
YU Zhou, HE Zhaoyi, TANG Liang, HE Sheng, XIAO Haixin, XIAO Yixun.
Study on preparation and microscopic properties of typical sulfate solid waste composite cementitious materials
[J]. Inorganic Chemicals Industry, 2024, 56(4): 90-97.
|
[9] |
BI Chao, ZHANG Xiaokang, WANG Xiugui.
Study on hydration characteristics and durability of high-strength concrete modified by mechanically activated waste incineration slag
[J]. Inorganic Chemicals Industry, 2024, 56(12): 142-149.
|
[10] |
JIANG Lilong, LI Jianqiu, YANG Lin, ZHANG Qinggang.
Study on performance of concrete with high-Mg phosphate tailing as mineral admixture
[J]. Inorganic Chemicals Industry, 2024, 56(1): 90-95.
|
[11] |
CUI Gengyin, XIE Lang, LU Yuexian, KONG Dewen, WANG Lingling.
Optimization of mechanical properties of basalt fiber reinforced phosphogypsum-based composites based on RSM
[J]. Inorganic Chemicals Industry, 2023, 55(8): 116-123.
|
[12] |
WANG Yue, FANG Guoxiang, ZHANG Daoming, WANG Weicheng.
Effect of nanosilica on gelling properties of hydraulic lime
[J]. Inorganic Chemicals Industry, 2023, 55(7): 75-80.
|
[13] |
DONG Linlin, GAO Huafeng.
Study on preparation of steel slag phase change concrete modified by hydrofluoric acid solution
[J]. Inorganic Chemicals Industry, 2023, 55(5): 109-114.
|
[14] |
XU Li, FANG Keneng, BI Yongxiang, YANG Min, CHEN Qianlin.
Preparation of modified granular-like CaSO4 and its application in polyvinyl chloride
[J]. Inorganic Chemicals Industry, 2023, 55(3): 104-112.
|
[15] |
ZHANG Yanru, REN Changzai, SONG Zhanlong, ZHU Jianjun, ZHAO Baofeng, XIE Hongzhang, WANG Zhenjiang, QI Xiaole.
Study on performance of biomass power plant ash as alternative to cement clinker in blended cements
[J]. Inorganic Chemicals Industry, 2023, 55(10): 128-135.
|