[1] |
王光祖. 超硬材料制造与应用技术[M]. 郑州: 郑州大学出版社, 2013.
|
[2] |
Wang Q C, Chen M H, Shan Z M, et al. Comparative study of mechanical and wear behavior of Cu/WS2 composites fabricated by spark plasma sintering and hot pressing[J]. Journal of Materials Science & Technology, 2017,33(11):1416-1423.
|
[3] |
Dudina D, Bokhonov B, Ukhina A, et al. Spark plasma sintering of diamond-and nanodiamond-metal composites:advances in processing and applications,(eds) Spark plasma sintering of materials[M]. Switzerland:Springer Cham, 2019.
|
[4] |
Shao W Z, Ivanov V, Zhen L, et al. A study on graphitization of diamond in copper-diamond composite materials[J]. Materials Letters, 2004,58(1/2):146-149.
|
[5] |
Tinga W, Voss W. Microwave power engineering[M]. New York: Academic Press, 1968.
|
[6] |
谭长水, 李大光, 李秀艳, 等. 微波在无机合成中的应用[J]. 无机盐工业, 2003,35(4):48-50.
|
[7] |
Roy R, Agrawal D, Cheng J, et al. Full sintering of powdered-metal bodies in a microwave field[J]. Nature, 1999,399:668-670.
|
[8] |
丁士文, 李兰芬, 王杏田, 等. 纳米Ba(1-x)CaxTi(1-y)ZryO3的制备、结构与介电性能[J]. 无机盐工业, 2004,36(1):21-23.
|
[9] |
林素英, 童庆松, 张华香, 等. 微波对固相烧结锂锰氧化合物电化学性能的影响[J]. 无机盐工业, 2004,36(6):18-20.
|
[10] |
刘建设, 王适. 微波烧结技术在超硬材料制品中的应用探讨[J]. 金刚石与磨料磨具工程, 2012,32(5):67-71.
|
[11] |
Hou M, Wang L, Guo S H, et al. Fabrication of FeCu matrixed diamond tool bits using microwave hot-press sintering[J]. Arabian Journal Science Engineering, 2018,44:6277-6284.
|
[12] |
Yang L, Wang L, Gao J Y, et al. Optimization of process parameters for preparing metallic matrix diamond tool bits by microwave pressureless sintering using response surface methodology[J]. Materials, 2018,11:2185.
|
[13] |
Guo S H, Ye X L, Wang L, et al. Fabrication of Cu based metallic binder for diamond tools by microwave pressureless sintering[J]. Materials, 2018,11:1453.
|
[14] |
Pricã C V, Neamtu B V, Marinca T F, et al. Synjournal of invar 36 type alloys from elemental and prealloyed powders by mechanical alloying[J]. Powder Metallurgy, 2019,62(3):155-161.
|
[15] |
Li W S, Zhang J. Microstructure and mechanical properties of a novel Cu-Fe based matrix for diamond segments[C]// Nanjing:2011 International Conference on Remote Sensing,Environment and Transportation Engineering, 2011: 6108-6111.
|
[16] |
Xie D L, Wan L, Song D D, et al. Low-temperature sintering of FeCuCo based pre-alloyed powder for diamond bits[J]. Journal of Wuhan University Technology:Materials Science, 2016,31(4):805-810.
|
[17] |
Wang S X, Geng L, Liu X J, et al. Manufacture of a new kind diamond grinding wheel with Al-based bonding agent[J]. Journal of Materials Processing Technology, 2009,209(4):1871-1876.
|
[18] |
Lin C S, Yang Y L, Lin S T. Performances of metal-bond diamond tools in grinding alumina[J]. Journal of Materials Processing Technology, 2008,201(1/2/3):612-617.
|
[19] |
丁立业, 陈江华, 魏晓莉. 金属包裹体的变化及对人造金刚石强度的影响[J]. 高压物理学报, 1990,4(2):96-104.
|
[20] |
Beffort O, Vaucher S, Khalid F A. On the thermal and chemical stability of diamond during processing of Al/diamond composites by liquid metal infiltration(squeeze casting)[J]. Diamond & Related Materials, 2004,13(10):1834-1843.
|
[21] |
García-Marro F, Mestra A, Kanyanta V, et al. Contact damage and residual strength in polycrystalline diamond(PCD)[J]. Diamond and Related Materials, 2016,65:131-136.
|