Inorganic Chemicals Industry ›› 2019, Vol. 51 ›› Issue (8): 48-51.doi: 10.11962/1006-4990.2018-0675

• Environment·Health·Safety • Previous Articles     Next Articles

Study on preparation of battery-grade ferrous sulfate by purification of titanium white slag

Guo Ju1,2,3   

  1. 1. Moutai College,Renhuai 564500,China
    2. State Key Laboratory of Medium and Low Grade Phosphate Rock and its Associated Resources for Efficient Utilization
    3. Guizhou University
  • Received:2019-02-19 Online:2019-08-10 Published:2020-06-15

Abstract:

Battery-grade high-purity ferrous sulphate product was purified and prepared by one-step precipitation method to remove impurities,taking the by-product titanium dioxide slag of a titanium dioxide production enterprise as rawmaterial and using composite precipitator instead of traditional chemical precipitator.It could be used as raw material for lithium iron phosphate production,thus providing a new way for the utilization of titanium white slag.Results showed that the compound precipitator was prepared by mixing ammonium hydrogen fluoride and reduced iron powder in a certain mass ratio of ammonium hydrogen fluoride to reduced iron powder(3.6:1).The reaction conditions were as follows: reaction temperature was 60 ℃, reaction time was 2 h, amount of precipitator was 2.67%(mass fraction) of titanium white slag, stirring speed was 300 r/min and concentration of Fe2+in reaction solution was 1.37 mol/L .The final product purity was 99.98% and the removal rates of Mg and Ti impurities were both over 99%.XRD results showed that the product was ferrous sulfate heptahydrate.

Key words: titanium white slag, ferrous sulfate, purification

CLC Number: