无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2020, Vol. 52 ›› Issue (11): 99-102.doi: 10.11962/1006-4990.2019-0660

• 催化材料 • 上一篇    下一篇

水热法合成叶片状氧化铜及其生长过程研究

张洪铭1(),王晶1,郑禹1,2,史忠祥1,孙子婷1,冯叙然1   

  1. 1.大连交通大学,辽宁省无机超细粉体制备及应用重点实验室,辽宁大连 116028
    2.山东国瓷功能材料股份有限公司
  • 收稿日期:2020-05-18 出版日期:2020-11-10 发布日期:2020-12-01
  • 通讯作者: 王晶
  • 作者简介:张洪铭(1994— ),女,硕士研究生,主要从事无机非金属材料制备;E-mail: 18842644599@163.com
  • 基金资助:
    国家重点研发计划项目(2017YFB0310300);辽宁省自然基金指导计划(2019-ZD-0090)

Synthesis of leaf-like copper oxide and its growth process by hydrothermal method

Zhang Hongming1(),Wang Jing1,Zheng Yu1,2,Shi Zhongxiang1,Sun Ziting1,Feng Xuran1   

  1. 1. Liaoning Key Laboratory for Fabrication and Application of Superfine Inorganic Powders,Dalian Jiaotong University,Dalian,116028,China
    2. Shandong National Porcelain Functional Materials Co.,Ltd.
  • Received:2020-05-18 Online:2020-11-10 Published:2020-12-01
  • Contact: Wang Jing

摘要:

以氯化铜和氢氧化钠为原料,在无表面活性剂条件下采用水热法合成出由纳米棒组装成的叶片状氧化铜粉体。探究了在不同水热时间下产物的相结构及微观形貌的变化,进而探索产物的形成过程。利用X射线衍射(XRD)、扫描电子显微镜(SEM)和高分辨率透射电子显微镜(HRTEM)对产物的相结构及微观形貌进行分析。研究结果表明,随着水热时间的延长,产物经历了由短棒状氢氧化铜到长纤维状氢氧化铜和氧化铜混相结构再到叶片状氧化铜结构的转变。对叶片状结构中位错及堆垛层错的形成分析,证明了该微观形貌的产生可归因于不完全定向依附生长机制。

关键词: 氢氧化钠, 氧化铜, 氢氧化铜

Abstract:

The leaf-like copper oxide powder assembled from nanorods was synthesized by hydrothermal method using copper chloride and sodium hydroxide as raw materials without surfactant.The changes of the phase structure and micromorphology of the product under different hydrothermal time were explored,and then the formation process of the product was explo-red.X-ray diffraction(XRD),scanning electron microscopy(SEM) and high-resolution transmission electron microscopy (HRTEM) were used to analyze the phase structure and micromorphology of the product.The results showed that the product underwent a transition from short rod-shaped copper hydroxide to long-fiber copper hydroxide and copper oxide mixed phase structure to leaf-like copper oxide structure with the extension of hydrothermal time.Analysis of the formation of dislocations and stacking faults in leaf-like structures proved that the generation of this micro-morphology can be attributed to the imperfect oriented growth mechanism.

Key words: sodium hydroxide, copper oxide, copper hydroxide

中图分类号: