无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2021, Vol. 53 ›› Issue (1): 36-39.doi: 10.11962/1006-4990.2020-0118

• 研究与开发 • 上一篇    下一篇

辅助溶剂热法合成纳米晶自组装CaWO4:Tb 3+微球及其发光性能

覃利琴(),杨黄根(),陈德,陶萍芳   

  1. 玉林师范学院化学与食品科学学院,广西农产资源化学与生物技术重点实验室,广西玉林 537000
  • 收稿日期:2020-07-11 出版日期:2021-01-10 发布日期:2021-01-08
  • 通讯作者: 杨黄根
  • 作者简介:覃利琴(1981— ),女,硕士,高级实验师,主要从事无机纳米材料的制备及性能研究;E-mail: qinliqin8888@163.com
  • 基金资助:
    国家自然科学基金(21767029);广西自然科学基金(2017GXNSFAA198197)

Assistanted solvothermal synthesis of nanocrystalline self-assembled CaWO4:Tb 3+ microspheres and luminescence properties

Qin Liqin(),Yang Huanggen(),Chen De,Tao Pingfang   

  1. College of Chemistry and Food Science,Yulin Normal University,Guangxi Key Lab of Agricultural Resources Chemistry and Biotechnology,Yulin 537000,China
  • Received:2020-07-11 Online:2021-01-10 Published:2021-01-08
  • Contact: Yang Huanggen

摘要:

以水和N,N-二甲基甲酰胺(DMF)为二元溶剂,丁二酸钠为辅助剂的溶剂热法合成纳米晶自组装CaWO4:Tb3+微球。探讨N,N-二甲基甲酰胺的用量、丁二酸钠的用量及Tb3+掺杂物质的量分数对发光性能的影响。利用X射线衍射(XRD)、紫外漫反射(DRS)、扫描电镜(SEM)、光致发光光谱(PL)、暗箱式紫外分析仪等对产物结构、形貌及其性能进行表征。实验表明:添加5 mL的DMF作为溶剂,加入1.2 g丁二酸钠为辅助剂,合成的产物为四方晶相的纳米晶自组装CaWO4:Tb3+微球。该微球在257 nm激发下表现出强发射峰,在546 nm 附近有较强的荧光发射峰,荧光强度是未添加丁二酸钠对应产物的3.8倍。

关键词: 自组装, 溶剂热法, 丁二酸钠, 发光性能

Abstract:

The nanocrystalline self-assembled CaWO4:Tb3+ microspheres were synthesized by solvothermal methods with wa-ter and N,N-dimethylformamide(DMF) as binary solvent and sodium succinate as auxiliary agent.The effects of the volume of N,N-dimethylformamide,the dosage of sodium succinate and the amount-of-substance fraction of Tb3+ on luminescence properties of CaWO4:Tb3+ were investigated in detail.The structure,morphology and properties of the product were character-ized by X-ray diffraction(XRD),UV-vis diffuse reflectance spectroscopy(DRS),scanning electron microscopy(SEM) and photoluminescence(PL) and dark-box ultraviolet analyzar etc..The results showed that the product was nanocrystalline self-assembled CaWO4:Tb3+ microspheres with the tetragonal structure,which could be obtained after solvothermal treatment with 5 mL DMF as solvent and 1.2 g sodium succinate as additive.The microsphere showed a strong emission peak at 257 nm and a strong fluorescence emission peak near 546 nm.The fluorescence intensity of the microspheres was 3.8 times higher than that of the corresponding product without sodium succinate.

Key words: self-assembled, solvothermal methods, sodium succinate, photoluminescence properties

中图分类号: