Catalytic Materials

Study on photocatalytic properties of S-C3N5 cement coating on waste wind power FRP filler concrete

  • ZHAO Xiaoli
Expand
  • School of Civil Engineering and Architecture,Zhengzhou University of Science and Technology,Zhengzhou 450064,China

Received date: 2024-10-03

  Online published: 2024-11-19

Abstract

In order to solve the harm of HCHO gas released by indoor decoration and the problem of resource utilization of waste wind turbine blades,S-doped 2.0% nitrogen-rich carbon nitride(2.0% S-C3N5) photocatalyst was prepared by in-situ thermal polymerization using 3-amino-1,2,4-triazole as precursor and thiourea as sulfur source.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),N2 adsorption-desorption,UV-vis diffuse reflectance spectroscopy(UV-vis DRS),steady-state fluorescence spectroscopy(PL),electron paramagnetic resonance spectroscopy(EPR),transient photocurrent spectroscopy(TPC) and electrochemical impedance spectroscopy(EIS) were used to characterize the phase,group,specific surface area,spectral absorption,photoelectron-hole recombination,defects and electrochemical properties of the photocatalyst.After S doping,the efficient separation of photoelectron-holes and the enhancement of spectral response were achieved,which effectively improved the photocatalytic activity of C3N5 and achieved efficient removal of HCHO.The removal rate of HCHO reached 94.97%.The FRP filler concrete prepared by using the glass fiber reinforced resin matrix composite(FRP) after physical crushing of waste wind turbine blades as the reinforcing filler was used as the matrix,and the silicate cement paste doped with 2.0% S-C3N5 was used as the photocatalytic coating to construct the FRP reinforced concrete loaded with 2.0% S-C3N5 cement coating.The removal rate of HCHO by 2.0% S-C3N5 doped 5.0% coating under visible light was 91.05%.The doping of FRP and the coating of 2.0% S-C3N5 cement coating significantly improved the mechanical properties of ordinary concrete.Compared with ordinary concrete,the compressive strength and flexural strength of 28 d curing was increased by 18.97% and 20.00%,respectively.

Cite this article

ZHAO Xiaoli . Study on photocatalytic properties of S-C3N5 cement coating on waste wind power FRP filler concrete[J]. Inorganic Chemicals Industry, 2025 , 57(9) : 125 -132 . DOI: 10.19964/j.issn.1006-4990.2024-0525

References

[1] LIU Xiufan, LING Cancan, CHEN Xingdong,et al.Single Mn atom modulated molecular oxygen activation over TiO2 for photocatalytic formaldehyde oxidation[J].Journal of Colloid and Interface Science2024666:12-21.
[2] 俞慧,李思航,丁洋,等.基于不同净化原理的室内环境空气甲醛净化研究[J].环境污染与防治202345(10):1387-1391,1401.
  YU Hui, LI Sihang, DING Yang,et al.Study on formaldehyde purification in indoor ambient air based on different purification principles[J].Environmental Pollution & Control202345(10):1387-1391,1401.
[3] WANG Jingquan, ZHANG Weijun, WU Huan,et al.Hydrothermal supramolecular preorganization synthesis of multi-morphological g-C3N4/Fe2O3 for photocatalytic removal of indoor formaldehyde under visible light[J].Journal of Environmental Chemical Engineering202311(2):109395.
[4] 陈彰旭,朱丹琛,傅明连.g-C3N4/TiO2复合材料制备及其处理罗丹明B研究[J].无机盐工业202355(7):130-136.
  CHEN Zhangxu, ZHU Danchen, FU Minglian.Study on preparation of g-C3N4/TiO2 composites and application for rhodamine B removal[J].Inorganic Chemicals Industry202355(7):130-136.
[5] MENG Deqin, GAO Sihang, CHENG Ziqi,et al.Study on CuO/g-C3N4 S-Scheme heterojunction for enhanced visible-light-driven photocatalytic degradation of xanthate[J].Optical Materials2023143:114259.
[6] LIAO Wenning, YANG Zhiquan, WANG Ying,et al.Novel Z-scheme Nb2O5/C3N5 photocatalyst for boosted degradation of tetracycline antibiotics by visible light-assisted activation of persulfate system[J].Chemical Engineering Journal2023478:147346.
[7] ZHANG Hongda, ZHAO Yunzhe, XU Guanghui,et al.Photocatalytic activation of sodium percarbonate by C3N5/C2N3 homojunction for rapid water purification:Efficient electron transfer of built-in electric field[J].Chemical Engineering Journal2024491:151885.
[8] SU Nan, CHENG Shasha, ZHANG Pingfan,et al.High-efficiency charge separation of Z-scheme 2D/2D C3N4/C3N5 nonmetal VdW heterojunction photocatalyst with enhanced hydrogen evolution activity and stability[J].International Journal of Hydrogen Energy202247(97):41010-41020.
[9] PENG Cong, HAN Lixiao, HUANG Jinming,et al.Comprehensive investigation on robust photocatalytic hydrogen production over C3N5 [J].Chinese Journal of Catalysis202243(2):410-420.
[10] GUJRAL H S, SINGH G, YANG J H,et al.Mesoporous titanium carbonitride derived from mesoporous C3N5 for highly efficient hydrogen evolution reaction[J].Carbon2022195:9-18.
[11] YAO Jia, LIU Dong, ZHAO Bing,et al.Insight into the effect of B-doping on electronic structure and photocatalytic H2 evolution performance of C3N5 nanosheets[J].Journal of Photochemistry and Photobiology A:Chemistry2023436:114359.
[12] FU Cheng, WU Tao, SUN Guowei,et al.Dual-defect enhanced piezocatalytic performance of C3N5 for multifunctional applicatio-ns[J].Applied Catalysis B:Environmental2023323:122196.
[13] CHEN Shengwang, SHENG Xiaoli, WANG Yanyun,et al.Thermally assisted in situ synthesis of C3N5/TiO2 S-scheme heterojunctions with enhanced visible light response for photocatalytic hydrogen precipitation[J].Applied Surface Science2024643:158600.
[14] 崔向东,刘思乐.g-C3N5纳米棒光电性能分析及对Cr(Ⅵ)和亚甲基蓝去除的研究[J].无机盐工业202456(10):159- 168.
  CUI Xiangdong, LIU Sile.Study on photoelectric performance analysis of g-C3N5 nanorods and removal of Cr(Ⅵ) and methylene blue[J].Inorganic Chemicals Industry202456(10):159- 168.
[15] 贺晓宇.基于氮化碳的光催化水泥混凝土制备与性能研究[J].公路202065(10):292-296.
  HE Xiaoyu.Preparation and properties of photocatalytic cement concrete based on carbon nitride[J].Highway202065(10):292-296.
[16] 吴林松,王星之,梅梦君,等.TiO2透水混凝土配合比设计和光催化性能[J].长江科学院院报202340(12):188-192,198.
  WU Linsong, WANG Xingzhi, MEI Mengjun,et al.Mix proportion design and photocatalytic performance of TiO2 modified pervious concrete[J].Journal of Changjiang River Scientific Research Institute202340(12):188-192,198.
[17] 郭湘立,冯艳文,郭勇.Ag-黑纳米TiO2-电气石可见光催化材料的制备与应用研究[J].涂料工业202353(10):55-60,68.
  GUO Xiangli, FENG Yanwen, GUO Yong.Preparation and application of plasma Ag-black nano TiO2-micro tourmaline visible light catalytic material[J].Paint & Coatings Industry202353(10):55-60,68.
[18] WANG Yin, LEI Shulai, ZHANG Xin,et al.First-principles study of nitrogen defect g-C3N4/WS2 heterojunction on photocatalytic activity[J].Current Applied Physics202239:70-76.
[19] 董永浩,马爱琼,李金叶,等.热剥离法制备含缺陷g-C3N4纳米片及光催化性能[J].稀有金属202145(1):47-54.
  DONG Yonghao, MA Aiqiong, LI Jinye,et al.Preparation of defective g-C3N4 nanosheets by thermal exfoliation and its photocatalytic performance[J].Chinese Journal of Rare Metals202145(1):47-54.
[20] 卜义夫,刘思乐,闫海生,等.Z型异质结1D/2D g-C3N5/g-C3N4的构建及可见光催化降解甲基橙[J].材料工程202452(10):170-182.
  BU Yifu, LIU Sile, YAN Haisheng,et al.Construction of Z-scheme heterojunction 1D/2D g-C3N5/g-C3N4 and visible photocatalytic degradation of methyl orange[J].Journal of Materials Engineering202452(10):170-182.
[21] 马以宏,陈兴涛,汤雷.化学混凝-TiO2/g-C3N5光催化降解处理印刷废水[J].无机盐工业202456(10):151-158.
  MA Yihong, CHEN Xingtao, TANG Lei.Treatment of printing wastewater by chemical coagulation-TiO2/g-C3N5 photocatalytic degradation[J].Inorganic Chemicals Industry202456(10):151-158.
[22] 林淑瑾,罗盛洋,熊晓立.负载S-g-C3N4/MgAl-CLDH光催化砂浆的去污及水化性能研究[J].硅酸盐通报202443(1):44-51.
  LIN Shujin, LUO Shengyang, XIONG Xiaoli.Decontamination and hydration performance of photocatalytic mortar loaded with S-g-C3N4/MgAl-CLDH[J].Bulletin of the Chinese Ceramic Society202443(1):44-51.
Outlines

/