Catalytic Materials

Study on hydrodeacidification performance of off-site pre-sulfidation catalysts

  • Jihai Jin ,
  • Lizhi Liu ,
  • Junhui Song ,
  • Zukai Jiao ,
  • Jinlong Yan ,
  • Tao Zhen ,
  • Duo Zhang
Expand
  • CNOOC Research Institute of Oil and Petrochemicals,Beijing 102209,China

Received date: 2020-03-25

  Online published: 2020-09-27

Abstract

In order to explore the catalytic activity of in-situ and off-site pre-sulfidation catalysts,the same batch of Ni-W oxida-tion catalyst was prepared by equal volume impregnation method.The physicochemical properties,catalytic activities and physicochemical properties of the three fresh catalysts were investigated.Three kinds of catalysts prepared from the processes of in-situ and off-site pre-sulfidation.The physical-and-chemical properties,catalytic activity and use physical-and-chemical properties of the three kinds of fresh catalysts were studied.The results showed that with the increase of sulfur loading amount on the catalyst,the bulk density of the pre-sulfidation catalyst increased,the specific surface area,pore volume and average pore diameter decreased,and the distribution of the pre-sulfidation catalyst in various pore sizes decreased.Among the three catalysts,the atom percentage of W 4+ metal and NiWS active phase on the catalyst with high sulfur loading was the highest,followed by the in-situ sulfurization catalyst,and the lowest was the off-site presulfurization catalyst with low sulfur loading.Under the conditions of pressure of 3.0 MPa,reaction space velocity of 1.0 h -1and hydrogen to oil volume ratio of 400∶1,the activity of catalysts was evaluated under different reaction temperatures with the distillate from Suizhong second-line and third-line as raw materials.Results showed that the activity of deacidification,desulfurization and denitrification of the off-site pre-sulfidation catalyst with high sulfur loading was the highest,followed by the in-situ sulfurization catalyst,and the catalytic activity of the off-site pre-sulfidation catalyst with low sulfur loading was the worst.

Cite this article

Jihai Jin , Lizhi Liu , Junhui Song , Zukai Jiao , Jinlong Yan , Tao Zhen , Duo Zhang . Study on hydrodeacidification performance of off-site pre-sulfidation catalysts[J]. Inorganic Chemicals Industry, 2020 , 52(9) : 100 -104 . DOI: 10.11962/1006-4990.2019-0529

References

[1] 袁洪申, 李雪卓. 环烷基原油的资源特征和利用[J]. 广州化工, 2009,37(5):48-51.
[2] 王萍萍, 唐晓东, 卿大勇, 等. 馏分油脱酸剂研究及应用进展[J]. 中外能源, 2010,15(2):71-75.
[3] 傅晓钦, 田松柏, 侯栓弟, 等. 高酸原油催化脱酸工艺研究进展[J]. 化工进展, 2005,24(9):968-970.
[4] 颜曦明, 李晓鸥, 李东胜, 等. 润滑油馏分脱酸技术研究进展[J]. 化学与黏合, 2011,33(2):61-64.
[5] 宋清虎. 含酸原油脱酸研究[J]. 精细石油化工进展, 2004,5(9):51-53.
[6] 吴锐, 耿新国, 刘铁斌, 等. 从原油中脱除石油酸的技术研究[J]. 当代化工, 2008,37(4):357-359.
[7] 申海平, 王玉章, 李锐. 高酸原油热处理脱酸的研究[J]. 石油炼制与化工, 2004,35(2):32-35.
[8] 安蓉, 唐晓东, 朱波, 等. 直馏柴油微量碱法脱酸技术研究[J]. 炼油技术与工程, 2005,35(1):38-41.
[9] 王延臻, 孙雪莹, 刘艳萍, 等. 胜华直馏柴油的固定床催化醋化脱酸[J]. 石油学报:石油加工, 2008,24(4):404-408.
[10] 孙雪莹, 王延臻, 刘晨光, 等. 重质高酸原油醋化脱酸催化剂的研究[J]. 石油学报:石油加工, 2007,23(3):92-95.
[11] 龙军, 毛安国, 田松柏, 等. 高酸原油直接催化脱酸裂化成套技术开发和工业应用[J]. 石油炼制与化工, 2011,42(3):23-26.
Outlines

/