[1] |
Vladislav D, Sara R, Richard A H , et al. Boron carbide:Structure,properties,and stability under stress[J]. J.Am.Ceram.Soc., 2011,94(11):3605-3628.
|
[2] |
Sharifi E M, Karimzadeh F, Enayati M H . Microstructure,mechani-cal properties and sintering model of B4C nozzle with micro holes by powder injection molding[J]. Powder Technol., 2012,228:334-338.
|
[3] |
Pilladi T R, Panneerselvam G, Anthonysamy S , et al. Thermal expan-sion of nanocrystalline boron carbide[J]. Ceramics International, 2012,38(5):3723-3728.
|
[4] |
Suri A K, Subramanian C, Sonber J K , et al. Synjournal and consolidation of boron carbide:A review[J]. Inter.Mater.Rev., 2010,55:4-40.
|
[5] |
Kobayashi T, Yoshida K, Yano T . Effects of heat-treatment tempe-rature and starting composition on morphology of boron carbide particles synthesized by carbothermal reduction[J]. Ceram.Int., 2013,39(1):597-603.
|
[6] |
Farzaneh F, Golestanifard F, Sheikhaleslami M S , et al. New route for preparing nanosized boron carbide powder via magnesiothermic reduction using mesoporous carbon[J]. Ceram.Int., 2015,41(10):13658-13662.
|
[7] |
Henrik P, Carina H, Jens B , et al. Low temperature CVD of thin,amorphous boron-carbon films for neutron detectors[J]. Chem.Va-por Depos., 2012,18(7/8/9):221-224.
|
[8] |
Chen X W, Dong S M, Kan Y M , et al. Effect of glycerine addition on the synjournal of boron carbide from condensed boric acid-poly-vinyl alcohol precursor[J]. RSC Advance, 2016,6(11):9338-9343.
|
[9] |
Kakiage M, Tahara N, Yanase I , et al. Low-temperature synjournal of boron carbide powder from condensed boric acid-glycerin product[J]. Mater.Lett., 2011,65(12):1839-1841.
|
[10] |
Kakiage M, Tominaga Y, Yanase I , et al. Synjournal of boron carbide powder in relation to composition and structural homogeneity of precursor using condensed boric acid-polyol product[J]. Powder Technol., 2012,221:257-263.
|
[11] |
Kakiage M, Tahara N, Tominaga Y , et al. Effect of molecular struc-ture of polyols with different molecular characteristics on synjournalof boron carbide powder[J]. Key Engineering Mater., 2013,534:61-65.
|
[12] |
Kakiage M, Tahara N, Yanagidani S , et al. Effect of boron oxide/ carbon arrangement of precursor derived from condensed polymer-boric acid product on low-temperature synjournal of boron carbide powder[J]. J.Ceram.Soc.Jpn., 2011,119(1390):422-425.
|
[13] |
Konno H, Sudoh A, Aoki Y , et al. Synjournal of C/B4C composites from sugar-boric acid mixed solution[J]. Mol.Cryst.Liq.Cryst., 2002,386(1):15-20.
|
[14] |
Sudoh A, Konno H, Habazaki H , et al. Synjournal of boron carbide microcrystals from saccharides and boric acid[J]. TANSO, 2007(226):8-12.
|
[15] |
Maqbool M, Din R, Zahid G H , et al. Effect of saccharides as carbon source on the synjournal and morphology of B4C fine particles from carbothermal synjournal precursors[J]. Mater.Express, 2015,5(5):390-400.
|
[16] |
Pilladi T R, Ananthansivan K, Anthonysamy S , et al. Synjournal of nanocrystalline boron carbide from boric acid-sucrose gel precursor[J]. J.Mater.Sci., 2012,47:1710-1718.
|
[17] |
Pilladi T R, Ananthansivan K, Anthonysamy S . Synjournal of boron carbide from boric oxide-sucrose gel precursor[J]. Powder Tech-nol., 2013,246:247-251.
|
[18] |
Watts J L, Talbot P C, Alarco J A , et al. Morphology control in high yield boron carbide[J]. Ceram.Inter., 2017,43(2):2650-2657.
|
[19] |
Sinha A, Mahata T, Sharma B P . Carbothermal route for prepara-tion of boron carbide powder from boric acid-citric acid gel precur-sor[J]. J.Nucl.Mater., 2002,301:165-169.
|
[20] |
Khanra A K . Production of boron carbide powder by carbothermal synjournal of gel material[J]. Bull.Mater.Sci., 2007,30(2):93-96.
|
[21] |
Hadian A M, Bigdeloo J A . The effect of time,temperature and com-position on boron carbide synjournal by sol-gel method[J]. J.Mater.Eng.Perform., 2008,17:44-49.
|
[22] |
Corradetti S, Carturan S, Biasetto L , et al. Boron carbide as a target for the SPES project[J]. J.Nucl.Mater., 2013,432:212-221.
|
[23] |
Colombo P, Mera G, Riedel R , et al. Polymer-derived ceramics:40 years of research and innovation in advanced ceramics[J]. J.Am.Ceram.Soc., 2010,93(7):1805-1837.
|
[24] |
Zhang X J, Li J, Cao K , et al. Synjournal and characterization of B-C polymer hollow microspheres from a new organodecaborane prece-ramic polymer[J]. RSC Advances, 2015,5:86214-86218.
|
[25] |
Wang H, Wang J L, Gou Y Z . Progress of advanced boron carbide ceramic materials prepared by precursor derived method[J]. J Inorg Materials, 2017,32(8):785-791.
|
[26] |
Barros P M, Yoshida I V P, Schiavon M A . Boron-containing poly (vinyl alcohol) as a ceramic precursor[J]. J.Non-Cryst.Solids, 2006,352(32/33/34/35):3444-3450.
|
[27] |
Mondal S, Banthia A K . Low-temperature synthetic route for boron carbide[J]. Journal of the European Ceramic Society, 2005,25(2/3):287-291.
|
[28] |
Yanase I, Ogawara R, Kobayashi H . Synjournal of boron carbide po-wder from polyvinyl borate precursor[J]. Mater.Lett., 2009,63(1):91-93.
|
[29] |
Fathi A, Ehsani N, Rashidzadeh M , et al. Synjournal of boron carbide nano particles using polyvinyl alcohol and boric acid[J]. Ceram.Silika, 2012,56(1):32-35.
|
[30] |
Hasegawa I, Fujii Y, Takayama T , et al. Phenolic resin boron oxide hybrids as precursors for boron carbide[J]. Mater.Sci.Lett., 1999,18(18):1629-1631.
|
[31] |
Najafi A, Golestani-Fard F, Rezaie H R , et al. A novel route to obt-ain B4C nano powder via sol-gel method[J]. Ceram Int, 2012,38(5):3583-3589.
|
[32] |
Najafi A, Golestani-Fard F, Rezaie H R. synjournal and characteriza-tion of B4C nanopowder[J]. Ceram.Int., 2018,44(17):21386-21394.
|
[33] |
Shawgi N, Li S X, Wang S , et al. Towards a large-scale production of boron carbide nano particles from poly(vinyl alcohol) and boric acid by a solid-state reaction-pyrolysis process(SRPP)[J]. Ceram. Int., 2018,44(1):774-778.
|
[34] |
Shawgi N, Li S X, Wang S , et al. An Innovative method of synjournal of nanoparticles and rod-like shape boron carbide by a solid-state polymerization(SSP) of poly(vinyl alcohol) and boric acid[J]. Ce-ram.Int., 2018,44(8):9887-9892.
|
[35] |
Shawgi N, Li S X, Wang S . A novel method of synjournal of high pu-rity nano plated boron carbide powder by a solid-state reaction of poly(vinyl alcohol) and boric acid[J]. Ceram.Int., 2017,43(13):10554-10558.
|
[36] |
Vijay S K, Krishnaprabhub R, Chandramoulia V , et al. Synjournal of nanocrystalline boron carbide by sucrose precursor method-Opti-mization of process conditions[J]. Ceram.Int., 2018,44(5):9887-9892.
|
[37] |
Tahara N, Kakiage M, Yanase I , et al. Effect of addition of tartaric acid on synjournal of boron carbide powder from condensed boric acid-glycerin product[J]. J.Alloys Compd., 2013,573:58-64.
|
[38] |
Din R, Zahid G H, Asghar Z , et al. Ethylene glycol assisted low-temperature synjournal of boron carbide powder from borate citrate precursors[J]. J.Asian Ceram.Soc., 2014,2:268-274.
|
[39] |
张云霏, 仲剑初, 王洪志 . 碳化硼微粉的低温合成[J]. 无机盐工业, 2010,43(10):29-32.
|
[40] |
Shawgi N, Li S X, Wang S , et al. Synjournal of nano particles and fiber-like shape boron carbide powder from ploy(vinyl alcohol) and boric acid[J]. J.Sol-Gel Sci.Technol., 2017,82(2):450-457.
|