界面化学对镍锰酸锂正极材料电化学性能影响的研究现状及分析

doi:10.19964/j.issn.1006-4990.2021-0184

摘要/Abstract

摘要：

尖晶石LiNi_0.5Mn_1.5O₄正极材料因理论比容量和理论比能量高、工作电压高、资源丰富且价格低廉等优点而备受关注,但该材料因为高电压下电解液的分解及界面副反应导致循环性能和倍率性能不佳,制约着材料的推广应用。结合近几年的研究报道,介绍了LiNi_0.5Mn_1.5O₄正极材料的结构及脱嵌机制、表/界面化学、改性方法,着重介绍了LiNi_0.5Mn_1.5O₄材料的表面性质及不同组分之间的界面反应机制及对正极材料电化学性能的影响,指出LiNi_0.5Mn_1.5O₄材料的晶面取向、颗粒形貌、表面元素分布、包覆及离子掺杂是改善镍锰酸锂材料电化学性能的有效途径。同时,通过溶剂替代、成膜添加剂的添加、改变锂盐的种类及浓度等方式,开发与之匹配的耐高压电解液也是提升镍锰酸锂电池性能的重要方法。最后,对LiNi_0.5Mn_1.5O₄正极材料表面改性和电解液界面构筑方面进行了总结和展望,旨在为提升该材料性能的相关研究提供参考。

关键词: 镍锰酸锂, 界面化学, 电解液分解, 正极材料改性

Abstract:

Spinel LiNi_0.5Mn_1.5O₄ cathode material has attracted much attention due to its high theoretical specific capacity,high theoretical specific energy,high working voltage,abundant resources and low price.However,its poor cycling performance and rate performance are caused by the decomposition of electrolyte and interface side reaction under high pressure,which restricts its popularization and application.Combined with the research reports in recent years,the structure and the mecha-nism of the intercalation,surface/interface chemistry,and modification methods of LiNi_0.5Mn_1.5O₄ cathode material are introdu-ced.The surface properties of LiNi_0.5Mn_1.5O₄,the interfacial reaction mechanism between different components and its influence on the electrochemical performance of cathode material are emphatically introduced.It proposes that the crystal plane orienta-tion,particle morphology,surface element distribution,coating and ion doping are effective ways to improve the electrochemi-cal performance of LiNi_0.5Mn_1.5O₄ material.At the same time,the development of suitable high-voltage electrolyte by solvent substitution,film-forming additives addition,changing the type and concentration of lithium salt is also an important method to improve the performance of LiNi_0.5Mn_1.5O₄ battery.Finally,the surface modification of LiNi_0.5Mn_1.5O₄ cathode material and the construction of electrolyte interface are summarized and prospected,which aims to provide reference for the related research on improving the performance of the material.

Key words: LiNi_0.5Mn_1.5O₄, interfacial chemistry, electrolyte decomposition, modification of cathode materials

中图分类号:

TQ131.11

周兰,李旺,廖文俊. 界面化学对镍锰酸锂正极材料电化学性能影响的研究现状及分析[J]. 无机盐工业, 2021, 53(11): 17-24.

ZHOU Lan,LI Wang,LIAO Wenjun. Research status and analysis of effect of interfacial chemistry on electrochemical properties of LiNi_0.5Mn_1.5O₄ cathode materials[J]. Inorganic Chemicals Industry, 2021, 53(11): 17-24.

图/表 6

图1

图2

图3

图4

图5

图6

参考文献 44

[1]	李旺, 周兰, 刘佳丽, 等. 镍锰酸锂正极材料制备及其适配性电解液研究最新进展[J]. 无机盐工业, 2019, 51(6):5-10.
[2]	金彦章, 王永和, 刘强, 等. 高电压正极材料LiNi_0.5Mn_1.5O₄制备及性能研究[J]. 无机盐工业, 2017, 49(6):45-49.
[3]	梁文彪, 李世友, 崔孝玲, 等. 高电压LiNi_0.5Mn_1.5O₄正极材料现状及展望[J]. 硅酸盐通报, 2019, 278(11):77-82.
[4]	ZHANG X, CHENG F, ZHANG K, et al. Facile polymer-assisted synjournal of LiNi_0.5Mn_1.5O₄ with a hierarchical micro-nano structure and high rate capability[J]. RSC Advances, 2012, 2(13):5669-5675.
[5]	TERADA Y, YASAKA K, NISHIKAWA F, et al. In situ XAFS an-alysis of Li(Mn,M)₂O₄(M=Cr,Co,Ni) 5V cathode materials for li-thium-ion secondary batteries[J]. Journal Solid State Chemistry, 2001, 156:286-291.
[6]	ZHOU L, WANG L, WAN L. Preparation,electrochemistry properti-es of LiNi_0.5-_xFe_0.0485Mn_1.5-_yO₄ by Spray-Dry method with different Mn/Ni ratios[J]. Digest Journal of Nanomaterials and Biostructures, 2020, 15(3):857-866.
[7]	HAI B, SHUKLA A K, DUNCAN H, et al. The effect of particle sur-face facets on the kinetic properties of LiNi_0.5Mn_1.5O₄ cathode ma-terials[J]. Journal of Materials Chemistry A, 2013, 1(3):759-769.
[8]	DENG Y F, ZHAO S X, XU Y H, et al. Impact of P doped in spinel LiNi_0.5Mn_1.5O₄ on degree of disorder,grain morphology,and electro-chemical performance[J]. Chemistry of Materials, 2015, 27:7734-7742.
[9]	CHEMELEWSKI K R, SHIN D W, LI W, et al. Octahedral and trunc-uncated high-voltage spinel cathodes:The role of morphology and surface planes in electrochemical properties[J]. Journal of Materi-als Chemistry A, 2013, 1:3347-3354.
[10]	GUO J, DENG Z, YAN S, et al. Preparation and electrochemical performance of LiNi_0.5Mn_1.5O₄spinels with different particle sizes and surface orientations as cathode materials for lithium-ion battery[J]. Journal of Materials Science, 2020, 55:13157-13176.
[11]	WEI Y, TUO K, WANG P, et al. Appropriate proportion truncated octahedron LiNi_0.5Mn_1.5O₄ with excellent electrochemical properties for lithium-ion batteries prepared by graphite-assisted calcination method[J]. Ionics, 2020, 26:6003-6012.
[12]	ZHOU M, GONG J, DENG Z, et al. Synjournal and electrochemical performances of LiNi_0.5Mn_1.5O₄ spinels with different surface orientations for lithium-ion batteries[J]. Ionics, 2020, 26(5):2187-2200.
[13]	CHEN Z, ZHAO R, DU P, et al. Polyhedral LiNi_0.5Mn_1.5O₄ with exc-ellent electrochemical properties for lithium-ion batteries[J]. Jo-urnal of Materials Chemistry A, 2014, 2:12835-12848.
[14]	LIU H, KLOEPSCH R, WANG J, et al. Truncated octahedral LiNi_0.5Mn_1.5O₄ cathode material for ultralonglife lithium-ion battery:Positive(100) surfaces in high-voltage spinel system[J]. J.Power Sources, 2015, 300:430-437.
[15]	LIU J, LIU W, JI S, et al. Electrospun spinel LiNi_0.5Mn_1.5O₄ hierarc-hical nanofibers as 5 V cathode materials for lithium-ion batteri-es[J]. ChemPlusChem, 2013, 78:636-641.
[16]	HAO X, AUSTIN M H, BARTLETT B M. Two-step hydrothermal synjournal of submicron Li₁+_xNi_0.5Mn_1.5O_4-_δ for lithium-ion battery ca-thodes(x=0.02,δ=0.12)[J]. Dalton Transactions, 2012, 41:8067-8076.
[17]	罗英, 王勇, 郭满毅, 等. 基于Mn³⁺浓度和形貌控制的高性能LiNi_0.5Mn_1.5O₄正极材料[J]. 上海航天, 2020, 224(2):50-57.
[18]	XIAO J, CHEN X, SUSHKO P V, et al. High-performance LiNi_0.5Mn_1.5O₄ spinel controlled by Mn³⁺ concentration and site di-sorder[J]. Adv.Mater., 2012, 24:2109-2116.
[19]	LIU D, LU Y, GOODENOUGH J B. Rate properties and elevated temperature performances of LiNi_0.5-_xCr₂_xMn1.5_xO₄(0≤2x≤0.8) as 5 V cathode materials for lithium-ion batteries[J]. Journal of The Electrochemical Society, 2010, 157:A1269-A1273.
[20]	LEE E S, MANTHIRAM A. Influence of doping on the cation order-ing and charge-discharge behavior of LiMn_1.5Ni_0.5-_xM_xO₄(M=Cr,Fe,Co,and Ga) spinels between 5.0 and 2.0 V[J]. Journal of Materi-als Chemistry A, 2013, 1:3118-3126.
[21]	LIN M, BEN L, SUN Y, et al. Insight into the atomic structure of high-voltage spinel LiNi_0.5Mn_1.5O₄ cathode material in the first cy-cle[J]. Chemistry of Materials, 2015, 27:292-303.
[22]	张文林, 霍宇, 李功伟, 等. 离子液体作为电解液添加剂用于高压锂离子电池[J]. 化工学报, 2019, 70(6):2334-2342.
[23]	XU Y, WAN L, LIU J, et al. γ-butyrolactone and glutaronitrile as 5 V electrolyte additive and its electrochemical performance for LiNi_0.5Mn_1.5O₄[J]. Journal of Alloys and Compounds, 2016, 698:207-214.
[24]	陈锐芳, 撒召遥, 苏长伟, 等. 尖晶石LiMn₂O₄正极材料的研究进展[J]. 电池, 2020, 265(5):91-95.
[25]	PIECZONKA N P, LIU Z, LU P, et al. Understanding transition-metal dissolution behavior in LiNi_0.5Mn_1.5O₄ high-voltage spinel for lithium ion batteries[J]. Journal of Physical Chemistry C, 2013, 117:15947-15957.
[26]	OKUNO Y, USHIROGATA K, SODEYAMA K, et al. Structures,electronic states,and reactions at interfaces between LiNi_0.5Mn_1.5O₄ cathode and ethylene carbonate electrolyte:A first-principles stu-dy[J]. The Journal of Physical Chemistry C, 2019, 123(4):2267-2277.
[27]	JARRY A, GOTTIS S, YU Y S, et al. The formation mechanism of fluorescent metal complexes at the LiNi_0.5Mn_1.5O₄/carbonate ester electrolyte interface[J]. Journal of the American Chemical Society, 2015, 137:3533-3539.
[28]	PANG W K, LIN H F, PETERSON V K, et al. Enhanced rate-capa-bility and cycling-stability of 5 V SiO₂ and polyimide-coated ca-tion ordered LiNi_0.5Mn_1.5O₄ lithium-ion battery positive electrod-es[J]. The Journal of Physical Chemistry C, 2017, 121:3680-3689.
[29]	KUENZEL M, KIM G T, ZARRABEITIA M, et al. Crystal engine-ering of TMPO_x-coated LiNi_0.5Mn_1.5O₄ cathodes for high-performa-nce lithium-ion batteries[J]. Materials Today, 2020, 39:127-136.
[30]	XU T, LI Y, WANG D, et al. Enhanced electrochemical performa-nce of LiNi_0.5Mn_1.5O₄ cathode material by YPO₄ surface modifica-tion[J]. ACS Sustainable Chemistry & Engineering, 2018, 6(5):5818-5825.
[31]	CHU C T, MONDAL A, KOSOVA N V, et al. Improved high-tem-perature cycliablity of AlF₃ modified spinel LiNi_0.5Mn_1.5O₄ cathode for lithium-ion batteries[J]. Applied Surface Science, 2020, 530:147169-147177.
[32]	TIURIN O, SOLOMATIN N, AUINAT M, et al. Atomic layer depo-sition(ALD) of lithium fluoride(LiF) protective film on Li-ion ba-ttery LiMn_1.5Ni_0.5O₄ cathode powder material[J]. Journal of Power Sources, 2020, 448:227373-227386.
[33]	孙健铭, 谭毅, 王凯, 等. Al³⁺掺杂对LiNi_0.5Mn_1.5O₄材料性能的影响[J]. 精细化工, 2020, 37(3):500-506.
[34]	CHEN A, KONG L, SHU Y, et al. Role of Al-doping with different sites upon the structure and electrochemical performance of spheri-cal LiNi_0.5Mn_1.5O₄ cathode materials for lithium-ion batteries[J]. RSC Advances, 2019, 9(22):12656-12666.
[35]	LI X, ZHANG Y, LI W, et al. The synergetic effect of LiMg_0.5Mn_1.5O₄ coating and Mg²⁺ doping on improving electrochemi-cal performances of high-voltage LiNi_0.5Mn_1.5O₄ by sol-gel self-co-combustion method[J]. Chemistry Select, 2020, 5(8):2593-2601.
[36]	GAO Y, YU H, SANDINENI P, et al. Fe doping in LiMn_1.5Ni_0.5O₄ by atomic layer deposition followed by annealing:Depths and occupa-tion sites[J]. The Journal of Physical Chemistry C, 2021, 125(14):7560-7567.
[37]	AKLALOUCH M, BOUADDI H, GARHI G, et al. Environmentally friendly 5 V cathode based on Fe-doped LiMn_1.5Ni_0.5O₄ spinel for Li-ion batteries[J]. Materials Today:Proceedings, 2021, 37:3951-3957.
[38]	SUN H, KONG X, FENG S, et al. Effects of Zn doping amount on the electrochemical properties of LiNi_0.5Mn_1.5O₄ lithium-ion cathode materials[J]. International Journal of Electrochemical Science, 2019, 14:11391-11405.
[39]	LIU G Y, KONG X, LUO T B, et al. Cu doped LiNi_0.5Mn_1.5-_xCu_xO₄ (x=0,0.03,0.05,0.10,0.15) with significant improved electroche-mical performance prepared by a modified low temperature solu-tion combustion synjournal method[J]. Ceramics International, 2018, 44:4603-4610.
[40]	李嘉雯, 王海龙, 余俏滟. Co³⁺掺杂对LiNi_0.5Mn_1.5O₄导电性和倍率性能的影响研究[J]. 广州化工, 2018, 46(22):38-40.
[41]	XU D, YANG F, LIU Z, et al. Effects of Co doping sites on the elec-trochemical performance of LiNi_0.5MnO₄ as a cathode material[J]. Ionics, 2020, 26(8):1-7.
[42]	LI F, MA J, LIN J, et al. Exploring the origin of electrochemical per-formance of Cr-doped LiNi_0.5Mn_1.5O₄[J]. Physical Chemistry Che-mical Physics, 2020, 22(7):2831-2838.
[43]	OH S W, PARK S H, KIM J H, et al. Improvement of electrochemi-cal properties of LiNi_0.5Mn_1.5O₄ spinel material by fluorine substitu-tion[J]. Journal of Power Sources, 2006, 157:464-470.
[44]	SHA O, TANG Z, WANG S, et al. The multi-substituted LiNi_0.475Al_0.01Cr_0.04Mn_1.475O_3.95F_0.05 cathode material with excellent rate capability and cycle life[J]. Electrochimica Acta, 2012, 77:250-255.

首页

全国无机盐信息中心

中国化工学会

无机酸碱盐专业委员会