Inorganic Chemicals Industry ›› 2021, Vol. 53 ›› Issue (6): 185-189.doi: 10.19964/j.issn.1006-4990.2020-0426

• Catalytic Materials • Previous Articles     Next Articles

Study on preparation of hollow α-Fe2O3 nanobelts and their photocatalytic properties

Wang Chenxin(),Chen Meili,Tian Mengkui,Yang Wanliang   

  1. School of Chemistry and Chemical Engineering,Guizhou University,Guiyang 550025,China
  • Received:2020-08-12 Online:2021-06-10 Published:2021-07-08

Abstract:

A novel hollow nanobelt α-Fe2O3(NB-α-Fe2O3) was successfully prepared by calcination of hydrogel precursor of melamine ferric nitrate supramolecular.Using NB-α-Fe2O3 as photocatalyst,the influence of the amount of catalyst and H2O2 on the performance of photocatalytic degradation of rhodamine B(RhB) were discussed,and the stability of the catalyst was investigated.The morphology,structure and composition of the as-prepared NB-α-Fe2O3 were analyzed by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(HR-TEM),surface area tester(BET) and X-ray photoelectron spectroscopy(XPS).The results showed that the prepared iron oxide belonged to α crystal phase and had good crystallinity,and the hollow nanobelt was assembled by α-Fe2O3 particles with 40~70 nm diameter.The effects of different amount of catalyst and hydrogen peroxide on the photocatalytic degradation of RhB were investigated.It was found that the optimal amount of catalyst and hydrogen peroxide were 30 mg and 0.5 mL,respectively.Under suitable conditions,after four cycles of visible light degradation RhB,the degradation efficiency of NB-α-Fe2O3 could still reach 96.8%.The as-prepared NB-α-Fe2O3 had good photocatalytic activity and stability.

Key words: hollow nanobelts, α-Fe2O3, photocatalytic degradation, cycle stability

CLC Number: