无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2014, Vol. 46 ›› Issue (6): 17-.

• 论文 • 上一篇    下一篇

双介孔二氧化硅制备研究进展

董家丽1,王露浔2,李 剑1,杨丽娜1,徐 龙1,孙宇萌1   

  1. 1.辽宁石油化工大学,辽宁抚顺 113001;2.中国石油锦西石化分公司
  • 发布日期:2014-06-09

Research progress of preparation of bimodal mesoporous silica

Dong Jiali1,Wang Luxun2,Li Jian1,Yang Lina1,Xu Long1,Sun Yumeng1   

  1. 1.Liaoning Shihua University,Fushun 113001,China;2.Petro China Jinxi Petrochemical Company
  • Online:2014-06-09

摘要: 综述了双介孔二氧化硅的制备方法。溶胶-凝胶法研究较多,包括单模板法和双模板法,探讨了不同合成条件对材料的孔径大小、孔径分布及形貌的影响。微乳法、水热法和微波法均在双介孔二氧化硅的制备中有所尝试,与双模板溶胶-凝胶法相比较更加简单易行且经济性更强。未来的主要研究方向将会是介孔的孔径大小、孔径分布及形貌结构的控制。

关键词: 双介孔二氧化硅, 制备方法, 合成条件

Abstract: Preparation methods of the bimodal mesoporous silica(SiO2) were summarized.The sol-gel method researched most in the studies,including single template and dual template methods.Effect of different synthesis conditions on the pore size,pore distribution,and morphology of the material was discussed.The microemulsion method,hydrothermal method,and microwave method all have been attempted to prepare the bimodal mesoporous SiO2.Comparing with dual template sol-gel method,those three methods are more simple and economic.The main research direction is to control the bimodal mesoporous pore size,pore size distribution,morphology,and the structure in the future.

Key words: bimodal mesoporous silica, preparation method, synthesis conditions

中图分类号: