Inorganic Chemicals Industry >
Study on granulation optimization for Al-based lithium adsorbent and its lithium recovery performance from brine
Received date: 2024-03-19
Online published: 2024-05-17
Currently，Al-based lithium adsorbent has been employed for large-scale industrial application，due to its high selectivity in original brine and fast adsorption rate using water elution，but it is also necessary to further improve absorption capacity and cycling performance.In this study，layered double hydroxide LiAl2（OH）7•2H2O（LDH） powders were prepared based on a homogeneous precipitation process using urea precipitant，and injection granulation was performed to obtain adsorbent particles，and the adsorption performance，structural stability performance and recycling performance were investigated.The results showed that cellulose acetate and NaHCO3 could be considered as the proper binder and porogenic agent，respectively.The static adsorption process proved that the adsorption capacities of powdery and granulated LDH were 7.90 mg/g and 7.40 mg/g，respectively.It was shown that the porous loading structure after granulation effectively improved the problem of binder-embedded active sites，and the adsorption capacity was not significantly decreased.In addition，the dynamic adsorption and recycling performance of GLDH-1 was tested，and the dynamic lithium adsorption kinetics to the original brine of Jiezhe Caka Salt Lake conformed to the pseudo-secondary adsorption behavior，and the GLDH-1 could still maintain 77% of the initial capacity after 15 cycles.In short，the injection granulation technique using cellulose acetate binder and NaHCO3 porogenic agent could effectively improve the Li-extraction performance of aluminum-based lithium adsorbent particles.
WANG Minrui , TIAN Guiying , ZHANG Ao , GE Junjie , ZHANG Lei , XIANG Jun , TANG Na . Study on granulation optimization for Al-based lithium adsorbent and its lithium recovery performance from brine[J]. Inorganic Chemicals Industry, 2025 , 57(3) : 36 -42 . DOI: 10.19964/j.issn.1006-4990.2024-0155
| 1 | DOMKE C， KOEPPEL A， DIXON G，et al.Energy transition-European battery manufacturing：Ahead the potential oversupply facing Europe′s booming battery industry［J］.European Energy & Climate Journal，2021，10（1/2）：42-48. |
| 2 | GROSJEAN C， MIRANDA P H， PERRIN M，et al.Assessment of world lithium resources and consequences of their geographic distribution on the expected development of the electric vehicle industry［J］.Renewable and Sustainable Energy Reviews，2012，16（3）：1735-1744. |
| 3 | XIONG Jiachun， ZHAO Zhongwei， LIU Dongfu，et al.Direct lithium extraction from raw brine by chemical redox method with LiFePO4/FePO4 materials［J］.Separation and Purification Technology，2022，290：120789. |
| 4 | XIAO Jiali， SUN Shuying， SONG Xingfu，et al.Lithium ion recovery from brine using granulated polyacrylamide-MnO2 ion-sieve［J］.Chemical Engineering Journal，2015，279：659-666. |
| 5 | AN J W， KANG DONG jun， TRAN K T，et al.Recovery of lithium from uyuni salar brine［J］.Hydrometallurgy，2012，117：64-70. |
| 6 | XU Wenhua， HE Lihua， ZHAO Zhongwei.Lithium extraction from high Mg/Li brine via electrochemical intercalation/de-intercalation system using LiMn2O4 materials［J］.Desalination，2021，503：114935. |
| 7 | LIU Gui， ZHAO Zhongwei， HE Lihua.Highly selective lithium recovery from high Mg/Li ratio brines［J］.Desalination，2020，474：114185. |
| 8 | SONG Jianfeng， HUANG Tao， QIU Hongbin，et al.Recovery of lithium from salt lake brine of high Mg/Li ratio using Na［FeCl4 2TBP］as extractant：Thermodynamics，kinetics and processes［J］.Hydrometallurgy，2017，173：63-70. |
| 9 | LIU Weiping， XU Hui， SHI Xichang，et al.Fractional crystallization for extracting lithium from Cha′erhan tail brine［J］.Hydrometallurgy，2017，167：124-128. |
| 10 | ZHANG Yuning， YU Dehao， JIA Chenyu，et al.Advances and promotion strategies of membrane-based methods for extracting lithium from brine［J］.Desalination，2023，566：116891. |
| 11 | KHALIL A， MOHAMMED S， HASHAIKEH R，et al.Lithium recovery from brine：Recent developments and challenges［J］.Desalination，2022，528：115611. |
| 12 | LU Yuheng， TANG Youchen， LIU Ruliang，et al.Multifunctional templating strategy for fabrication of Fe，N-codoped hierarchical porous carbon nanosheets［J］.Chinese Journal of Polymer Science，2022，40（1）：2-6. |
| 13 | 程鹏高，黄传峰，甘善甜，等.铝基锂吸附剂制备及其在泰和地下卤水提锂中的应用［J］.无机盐工业，2021，53（6）：140-144. |
| CHENG Penggao， HUANG Chuanfeng， GAN Shantian，et al.Preparation of aluminum-based lithium adsorbent and its application in extracting lithium from Taihe underground brine［J］.Inorganic Chemicals Industry，2021，53（6）：140-144. | |
| 14 | LI Yingjiao， XUE Lindi， ZHANG Yidong，et al.Synthesis of Ni-Al layered double hydroxide via coprecipitation：Formation mechanism，synthesis intensification，and catalytic application［J］.AIChE Journal，2023，69（3）：e18006. |
| 15 | ZHONG Jing， LIN Sen， YU Jianguo.Effects of excessive lithium deintercalation on Li+ adsorption performance and structural stability of lithium/aluminum layered double hydroxides［J］.Journal of Colloid and Interface Science，2020，572：107-113. |
/
| 〈 |
|
〉 |