Inorganic Chemicals Industry >
Improvement of high temperature stability of high nickel single crystal cathode materials by B/Al/Zr synergistic strategy
Received date: 2023-03-09
Online published: 2023-08-25
In order to meet the demand of high energy density lithium-ion Battery（LIBs） in recent years，single crystal high nickel LiNi0.89Co0.06Mn0.05O2（NCM89） cathode materials have attracted more and more attention due to their high specific capacity and low cost.However，excessive residual lithium on the surface of NCM89，unsatisfactory high-temperature cycling performance and poor thermal stability limit their further commercial use.In order to solve the material collapse and the corresponding capacity loss of NCM89 cathode during the long cycle process，an effective strategy to improve the electrochemical performance of NCM89 using B/Al/Zr synergistic strategy was proposed.B/Al/Zr doped NCM89 cathode materials were synthesized by calcining the precursor Ni0.89Co0.06Mn0.05（OH）2 after full mixing of lithium，aluminum，boron and zirconium sources.The results showed that the cathode electrode of the B/Al/Zr cooperative NCM89 had good cyclic stability.The specific discharge capacity of 0.4%B/Al/Zr@NCM89 cathode was 131.6 mA·h/g after 200 cycles，which was significantly higher than the original NCM89（99.1 mA·h/g，with a capacity retention rate of 45%）.Homogeneous doping of B/Al/Zr in the bulk phase could effectively reduce the lithium residue，improve the interfacial lithium ion transport，and inhibit the side reactions at the interface.This work provided new insights for improving the interfacial stability and electrochemical performance of high Ni materials，thus promoting the commercial application of high energy density lithium ion batteries.
FENG Zhun . Improvement of high temperature stability of high nickel single crystal cathode materials by B/Al/Zr synergistic strategy[J]. Inorganic Chemicals Industry, 2023 , 55(8) : 59 -64 . DOI: 10.19964/j.issn.1006-4990.2023-0122
| 1 | ZUBI G， DUFO-LóPEZ R， CARVALHO M，et al.The lithium-ion battery：State of the art and future perspectives［J］.Renewable and Sustainable Energy Reviews，2018，89：292-308. |
| 2 | LI Wangda， ERICKSON E M， MANTHIRAM A.High-nickel layered oxide cathodes for lithium-based automotive batteries［J］.Nature Energy，2020，5（1）：26-34. |
| 3 | PARK G T， RYU H H， PARK N Y，et al.Tungsten doping for stabilization of Li［Ni0.90Co0.05Mn0.05］O2 cathode for Li-ion battery at high voltage［J］.Journal of Power Sources，2019，442：227242. |
| 4 | LIU Hanshuo， XIE Zhong， QU Wei，et al.High-voltage induced surface and intragranular structural evolution of Ni-rich layered cathode［J］.Small，2022，18（19）：2200627. |
| 5 | 齐四清，苏林华，范新宇，等.锂离子电池正极材料低温性能衰退机理研究［J］.电气工程学报，2022，17（3）：19-29. |
| QI Siqing， SU Linhua， FAN Xinyu，et al.Study on the cathode materials′ deterioration mechanism for lithium-ion batteries at low temperature［J］.Journal of Electrical Engineering，2022，17（3）：19-29. | |
| 6 | LI Wangda， ASL H Y， XIE Qiang，et al.Collapse of LiNi1– x– y Co x Mn y O2 lattice at deep charge irrespective of nickel content in lithium-ion batteries［J］.Journal of the American Chemical Society，2019，141（13）：5097-5101. |
| 7 | ZHAO Jianqing， ZHANG Wei， HUQ A，et al. In situ probing and synthetic control of cationic ordering in Ni-rich layered oxide cathodes［J］.Advanced Energy Materials，2017，7（3）：1601266. |
| 8 | GOMEZ-MARTIN A， REISSIG F， FRANKENSTEIN L，et al.Magnesium substitution in Ni-rich NMC layered cathodes for high-energy lithium ion batteries［J］.Advanced Energy Materials，2022，12（8）：2270029. |
| 9 | NIE Yan， XIAO Wei， MIAO Chang，et al.Effect of calcining oxygen pressure gradient on properties of LiNi0.8Co0.15Al0.05O2 cathode materials for lithium ion batteries［J］.Electrochimica Acta，2020，334：135654. |
| 10 | PARK K， HAM D J， PARK S Y，et al.High-Ni cathode material improved with Zr for stable cycling of Li-ion rechargeable batteries［J］.RSC Advances，2020，10（45）：26756-26764. |
| 11 | 王恩通，杨林芳.高比容量锂离子电池正极材料LiNi0 .6Co 0.2Mn0.2O2的制备及性能［J］.应用化学，2022，39（8）：1209-1215. |
| WANG Entong， YANG Linfang.Preparation and properties of LiNi0.6Co0.2Mn0.2O2 cathode material for high specific capacity lithium ion battery［J］.Chinese Journal of Applied Chemistry，2022，39（8）：1209-1215. | |
| 12 | 栗志展，秦金磊，梁嘉宁，等.高镍三元层状锂离子电池正极材料：研究进展、挑战及改善策略［J］.储能科学与技术，2022，11（9）：2900-2920. |
| LI Zhizhan， QIN Jinlei， LIANG Jianing，et al.High-nickel ternary layered cathode materials for lithium-ion batteries：Research progress，challenges and improvement strategies［J］.Energy Storage Science and Technology，2022，11（9）：2900-2920. | |
| 13 | YU Xinrun， WANG Longlong， MA Jun，et al.Selectively wetted rigid-flexible coupling polymer electrolyte enabling superior stability and compatibility of high-voltage lithium metal batteries［J］.Advanced Energy Materials，2020，10（18）：1903939. |
| 14 | SI Zheng， SHI Baozhao， HUANG Jin，et al.Titanium and fluorine synergetic modification improves the electrochemical performance of Li（Ni0.8Co0.1Mn0.1）O2 ［J］.Journal of Materials Chemistry A，2021，9（14）：9354-9363. |
| 15 | BI Yujing， TAO Jinhui， WU Yuqin，et al.Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode［J］.Science，2020，370（6522）：1313-1317. |
| 16 | CHENG S H S， LIU Chen， ZHU Fangyan，et al.（Oxalato）borate：The key ingredient for polyethylene oxide based composite electrolyte to achieve ultra-stable performance of high voltage solid-state LiNi0.8Co0.1Mn0.1O2/lithium metal battery［J］.Nano Energy，2021，80：105562. |
/
| 〈 |
|
〉 |