Environment·Health·Safety

Study on preparation of desulfurizer and byproduct gypsum from calcium carbide slag by cyclone separation

  • YANG Yue ,
  • ZHU Ganyu ,
  • ZHANG Jianbo ,
  • MENG Ziheng ,
  • LIU Xinhui ,
  • YANG Jing ,
  • YAN Kun ,
  • PENG Zonggui ,
  • WANG Qiujian ,
  • LI Huiquan
Expand
  • 1. CAS Key Laboratory of Green Process and Engineering,National Engineering Research Center of Green Recycling for Strategic Metal Resources,Institute of Process Engineering,Chinese Academy of Sciences,Beijing 100190,China
    2. Huaneng Qinbei Power Generation Co., Ltd., Jiaozuo 454650,China
    3. Beijing Genyuan Environmental Protection Co., Ltd., Beijing 101300,China
    4. School of Chemical Engineering,University of Chinese Academy of Sciences,Beijing 100049,China.

Received date: 2022-11-01

  Online published: 2023-05-15

Abstract

Calcium carbide slag is a solid waste from the process of producing acetylene by calcium carbide,which is a good raw material to replace limestone in the preparation of low carbon desulfurizer.However,there are some problems in the application process,such as high impurity content and difficult separation of coarse particles.To solve the above problems,multistage cyclone impurity separation was used to separate the impurities and large particles of calcium carbide slag.The efficiency of cyclone separation of calcium carbide slag reached 93.97% under optimized conditions.Scanning electron microscopy(SEM),X-ray diffractometry(XRD),X-ray fluorescence spectrometer(XRF) and X-ray photoelectron spectroscopy(XPS) were used to characterize the morphology,composition and phase equality of calcium carbide slag.The changes of composition and particle size before and after the cyclone were systematically analyzed,and the occurrence form and distribution law of impurities in calcium carbide slag were discussed in detail.The results showed that calcium in calcium carbide slag was mainly existed in the form of calcium hydroxide,and the content was not different before and after cyclone separation.The impurities mainly included ferric oxide,aluminum oxide,magnesium oxide,silicon dioxide,sulfur,carbon,and water-soluble chloride ions.After cyclone separation,silicon dioxide and aluminum oxide were enriched in fine slag and exist in the form of aluminosilicate.Ferric oxide and carbon were enriched in the coarse slag,and carbon was existed in the form of elemental carbon and carbonate.The contents of chlorine and magnesium were low and uniformly distributed,aluminum and silicon were concentrated,aluminum and sulfur were concentrated,and aluminum and sulfur particles are embedded in calcium carbide slag particles.Using calcium carbide slag cyclone fine slag as desulfurizer for flue gas desulfurization,the water content of desulfurized gypsum by industrial by-product was 13.20%,and the mass fraction of calcium sulfate dihydrate in gypsum was 90.01%.The above research could provide reference for the resource utilization of calcium carbide slag.

Cite this article

YANG Yue , ZHU Ganyu , ZHANG Jianbo , MENG Ziheng , LIU Xinhui , YANG Jing , YAN Kun , PENG Zonggui , WANG Qiujian , LI Huiquan . Study on preparation of desulfurizer and byproduct gypsum from calcium carbide slag by cyclone separation[J]. Inorganic Chemicals Industry, 2023 , 55(5) : 78 -84 . DOI: 10.19964/j.issn.1006-4990.2022-0638

References

1 牟秀娟,朱干宇,颜坤,等.干法电石渣性质分析及乙炔气逸出行为研究[J].化工学报202172(2):1107-1115.
  MU Xiujuan, ZHU Ganyu, YAN Kun,et al.Properties analysis of dry-process calcium carbide slag and study on acetylene gas escape behavior[J].CIESC Journal202172(2):1107-1115.
2 ZHANG Junjie, TAN Hongbo, HE Xingyang,et al.Utilization of carbide slag-granulated blast furnace slag system by wet grinding as low carbon cementitious materials[J].Construction and Building Materials2020249:118763.
3 ZHANG Chunxiao, LI Yingjie, BIAN Zhiguo,et al.Simultaneous CO2 capture and thermochemical heat storage by modified carbide slag in coupled calcium looping and CaO/Ca(OH)2 cycles[J].Chinese Journal of Chemical Engineering202136:76-85.
4 赵立文,朱干宇,李少鹏,等.电石渣特性及综合利用研究进展[J].洁净煤技术202127(3):13-26.
  ZHAO Liwen, ZHU Ganyu, LI Shaopeng,et al.Research progress on characteristics and comprehensive utilization of calcium carbide slag[J].Clean Coal Technology202127(3):13-26.
5 HUANG Zhong, LONG Jimiao, DENG Lei,et al.Feasibility study of using carbide slag as In-bed desulfurizer in circulating fluidized bed boiler[J].Applied Sciences20199(21):4517.
6 ZHU Ganyu, MENG Ziheng, LI Shaopeng,et al.High efficiency desulfurization behavior by the sustainable low carbon utilization of carbide slag[J].Process Safety and Environmental Protection2022159:809-818.
7 王新博,周志华,邵明凯.循环利用电石渣制备活性氧化钙技术研究[J].耐火与石灰202045(5):5-8.
  WANG Xinbo, ZHOU Zhihua, SHAO Mingkai.Study on preparation of activated calcium oxide from calcium carbide slag[J].Refractories & Lime202045(5):5-8.
8 侯新凯,武志江,郑伟豪,等.机械筛分法去除电石渣中非钙成分的研究[J].矿产综合利用2020(2):161-166,155.
  HOU Xinkai, WU Zhijiang, ZHENG Weihao,et al.Study on removal of non-calcium ingredients from carbide slag by mechanical screening[J].Multipurpose Utilization of Mineral Resources2020(2):161-166,155.
9 WU Lei, QI Guansheng, LU Wei,et al.Study on preparation and performance of calcium carbide slag foam for coal mine disaster reduction and CO2 storage[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects2020606:125322.
10 LIU Guofei, MENG Jun, HUANG Yanlan,et al.Effects of carbide slag,lodestone and biochar on the immobilization,plant uptake and translocation of As and Cd in a contaminated paddy soil[J].Environmental Pollution2020266:115194.
11 李永宁,暨思叡,严亚军,等.电石渣替代石灰石脱硫的改造实践[J].热电技术2020(1):22-28.
  LI Yongning, JI Sirui, YAN Yajun,et al.Transformation practice of calcium carbide slag replacing limestone for desulphurizati-on[J].Cogeneration Power Technology2020(1):22-28.
12 马英,何琦,杨有余,等.水力旋流动态沉降电石渣石膏分级研究[J].中国环保产业2020(6):64-68.
  MA Ying, HE Qi, YANG Youyu,et al.Study on grading of carbide slag gypsum particles by hydrocyclone and dynamic sedimentation[J].China Environmental Protection Industry2020(6):64-68.
13 孙吉鹏,王书礼,王磊,等.一种电石渣除杂处理系统中国,210875709U[P].2020-06-30.
14 张涛,陆飞,焦勇.电厂电石渣-石膏湿法脱硫工艺的应用[J].化工管理2021(28):169-170.
  ZHANG Tao, LU Fei, JIAO Yong.Application of calcium carbide slag-gypsum wet desulfurization process in power plant[J].Che-mical Enterprise Management2021(28):169-170.
15 王明嘉.提高水力旋流器分级效率的数值计算研究[J].中国资源综合利用202240(1):50-52.
  WANG Mingjia.Research on numerical calculation for improving the classification efficiency of hydrocyclones[J].China Resources Utilization Comprehensive202240(1):50-52.
16 李玥.结构优化型水力旋流器的数值模拟和实验研究[D].天津:天津大学,2018.
  LI Yue.Experimental and numerical study of A hydrocyclone with the modification of geometrical structure[D].Tianjin:Tianjin University,2018.
17 齐加刚.水力旋流器分级性能分析及其改进[D].哈尔滨:哈尔滨工业大学,2021.
  QI Jiagang.Performance analysis and improvement of hydrocyclone classificatpion[D].Harbin:Harbin Institute of Technology,2021.
18 LIU Bing, LI Luncao, WANG Huajian,et al.Numerical simulation and experimental study on internal and external characteristics of novel Hydrocyclones[J].Heat and Mass Transfer202056(6):1875-1887.
19 夏倩茹,唐楠.旋风分离器的关键制造技术[J].中国化工装备202224(5):14-18.
  XIA Qianru, TANG Nan.Manufacture of cyclone separator[J].China Chemical Industry Equipment202224(5):14-18.
20 邹小艳.水力旋流器分离过程性能的研究[D].长沙:长沙理工大学,2016.
  ZOU Xiaoyan.Study on performance of hydrocyclone separation process[D].Changsha:Changsha University of Science & Technology,2016.
21 张建育,顾剑,蒋明,等.电石渣脱除含硫废气的可行性研究[J].化工设计通讯201945(8):168-169.
  ZHANG Jianyu, GU Jian, JIANG Ming,et al.Feasibility study of removing SO2-containing off gas by carbide slag[J].Chemical Engineering Design Communications201945(8):168-169.
22 石梅,马建荣,段蕊.电石渣代替石灰石在海勃湾发电厂脱硫系统的尝试[J].内蒙古石油化工201137(20):92-93.
  SHI Mei, MA Jianrong, DUAN Rui.Attempt of replacing limestone with carbide slag in desulfurization system of Haibowan Power Plant[J].Inner Mongolia Petrochemical Industry201137(20):92-93.
23 董添.加大工业副产石膏资源综合利用[N].中国证券报,2022-03-05(A07).
24 杨再银.中国工业副产石膏利用现状及“十四五”展望[J].硫酸工业2021(7):1-4,23.
  YANG Zaiyin.Utilization status of industrial by-product gypsum in China and its prospect in the 14th Five-Year Plan[J].Sulphuric Acid Industry2021(7):1-4,23.
25 刘芳芳.加快推进工业副产石膏资源化利用[N].中国建材报,2021-03-29(1).
26 陈家伟,张仁亮.工业副产石膏资源化利用生态环境技术发展报告[J].广州化工202048(24):1-3.
  CHEN Jiawei, ZHANG Renliang.Report on ecological environment technology development of industrial by-product gypsum resource utilization[J].Guangzhou Chemical Industry202048(24):1-3.
27 马晶.工业副产石膏资源化综合利用的探索[J].建材发展导向202018(4):13-16.
  MA Jing.Exploration on comprehensive utilization of industrial by-product gypsum as resource[J].Development Guide to Building Materials202018(4):13-16.
28 赵立文.电石渣湿法脱硫及石膏结晶过程协同调控工艺研究[D].昆明:昆明理工大学,2021.
  ZHAO Liwen.Study on synergistic control technology of wet desulfurization of carbide slag and gypsum crystallization proce-ss[D].Kunming:Kunming University of Science and Technology,2021.
29 ZHANG Yuliang, LIU Xiaoming, XU Yingtang,et al.Preparation of road base material by utilizing electrolytic Manganese residue based on Si-Al structure:Mechanical properties and Mn2+ stabilization/solidification characterization[J].Journal of Hazardous Materials2020390:122188.
30 LI Wentao, YI Yaolin.Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag[J].Construction and Building Materials2020238:117713.
31 MA Xiaotong, LI Yingjie, ZHANG Chunxiao,et al.Development of Mn/Mg-copromoted carbide slag for efficient CO2 capture under realistic calcium looping conditions[J].Process Safety and Environmental Protection2020141:380-389.
32 WANG Guodong, GUO Yafei, YU Jun,et al.Ni-CaO dual function materials prepared by different synthetic modes for integrated CO2 capture and conversion[J].Chemical Engineering Jo- urnal2022428:132110.
33 QIN Yihe, ZHANG Kai, HE Xuwen.Characteristics and mechanism of adsorption of tartaric acid by carbide slag ascertained and applied to prepare a binder[J].Journal of Cleaner Production2022337:130477.
34 国家市场监督管理总局,国家标准化管理委员会. 烟气脱硫石膏: [S].北京:中国标准出版社,2019.
Outlines

/