Inorganic Chemicals Industry >
Performance and characterization of Ni-Fe/Ce0.9Gd0.1O1.95 composite anode for cathode-supported single cell
Received date: 2021-03-24
Online published: 2022-03-14
The bimetallic anode for the cathode-supported single cell was explored to improve the electrochemical performance of intermediate temperature solid oxide fuel cell.The single cell was supported by the La0.6Sr0.4CoO3(LSC)-Ce0.9Gd0.1O1.95(GDC)cathode-supported body,which was coated the La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) electrolyte film and the Sm0.2Ce0.8O1.9(SDC) bu-ffer layer by spin-coating,and was tape-coated the Ni-Fe/GDC composite anode.The electrolyte was prepared by glycine-nitrate process,and the anode was prepared by hard template and wet impregnation method.The prepared materials were ana-lyzed by XRD and SEM.The maximum power densities of the cell were 0.73 W/cm2 and 0.64 W/cm2 at 800 ℃ and 750 ℃ in hydrogen,and the values were 0.41 W/cm2 and 0.40 W/cm2 in dry methane,respectively.The conducted SEM showed that the anode had the porous microstructure with high specific surface and bimetallic particles were densely coated on the vermicular GDC,which resulted in the high power generation performance.
Hongxin YOU , Qiang WANG , Lian PENG . Performance and characterization of Ni-Fe/Ce0.9Gd0.1O1.95 composite anode for cathode-supported single cell[J]. Inorganic Chemicals Industry, 2022 , 54(1) : 34 -38 . DOI: 10.19964/j.issn.1006-4990.2021-0182
[1] | MINH N Q. Solid oxide fuel cell technology-Features and applica-tions[J]. Solid State Ionics, 2004, 174(1/2/3/4):271-277. |
[2] | 韩敏芳. 固体氧化物燃料电池(SOFC)技术进展和产业前景[J]. 民主与科学, 2017(5):25-26. |
[3] | 蒋三平. 中温固体氧化物燃料电池优势和挑战的简要评述(英文)[J]. 电化学, 2012, 18(6):479-495. |
[4] | 孙帆, 郑勇, 高小龙, 等. 固体氧化物燃料电池电解质和电极材料的研究进展[J]. 金属功能材料, 2010, 17(4):75-80. |
[5] | MOLENDA J, SWIERCZEK K, ZAJAC W. Functional materials for the IT-SOFC[J]. Journal of Power Sources, 2007, 173(2):657-670. |
[6] | LEE D, HAN J H, CHUN Y, et al. Preparation and characterization of strontium and magnesium doped lanthanum gallates as the elec-trolyte for IT-SOFC[J]. Journal of Power Sources, 2007, 166(1):35-40. |
[7] | 隋静, 董立峰. 锥管状LSGM电解质支撑的SOFC的研制[J]. 电池, 2014, 44(5):274-276. |
[8] | TAO Y, SHAO J, WANG J, et al. Synjournal and properties of La0.6Sr0.4CoO3-δ nanopowder[J]. Journal of Power Sources, 2008, 185(2):609-614. |
[9] | 王海霞, 屠恒勇. SOFC阴极材料La0.6Sr0.4CoO3-δ的甘氨酸-硝酸盐法合成与表征[J]. 功能材料, 2010, 41(3):397-400. |
[10] | ISHIHARA T, YAN J, SHINAGAWA M, et al. Ni-Fe bimetallic anode as an active anode for intermediate temperature SOFC using LaGaO3 based electrolyte film[J]. Electrochimica Acta, 2006, 52(4):1645-1650. |
[11] | ISHIHARA T, SHINAGAWA M, KAWAKAMI A, et al. Ni-Fe bi-metallic anode for intermediate temperature solid oxide fuel cells using LaGaO3 based oxide electrolyte[J]. Materials Science Forum, 2007, 539-543:1350-1355. |
[12] | SUN Y F, LI J H, CUI L, et al. A-site-deficiency facilitated in situ growth of bimetallic Ni-Fe nano-alloys:A novel coking-tolerant fuel cell anode catalyst[J]. Nanoscale, 2015, 7(25):11173-11181. |
[13] | SIN A, KOPNIN E, DUBITSKY Y, et al. Performance and life-time behaviour of NiCu-CGO anodes for the direct electro-oxidation of methane in IT-SOFCs[J]. Journal of Power Sources, 2007, 164(1):300-305. |
[14] | 王群浩, 林冬, 彭开萍. CuNi-GDC双金属阳极支撑的IT-SOFC制备及性能[J]. 电源技术, 2012, 36(8):1128-1131. |
[15] | AN W, GATEWOOD D, DUNLAP B, et al. Catalytic activity of bi-metallic nickel alloys for solid-oxide fuel cell anode reactions from density-functional theory[J]. Journal of Power Sources, 2011, 196(10):4724-4728. |
[16] | 田丰源, 刘江. 固体氧化物燃料电池的制备工艺[J]. 硅酸盐学报, 2021, 49(1):136-152. |
[17] | 冯潇, 赵雪雪, 邢亚哲. 热喷涂制备固体氧化物燃料电池电解质层的研究进展[J]. 表面技术, 2019, 48(4):10-17. |
[18] | CHELMEHSARA M E, MAHMOUDIMEHR J. Techno-economic comparison of anode-supported,cathode-supported,and electrolyte-supported SOFCs[J]. International Journal of Hydrogen Energy, 2018, 43(32):15521-15530. |
[19] | SHRI P B, SENTHIL K S, ARUNA S T. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell:A review[J]. Renewable and Sustainable Energy Reviews, 2014, 36:149-179. |
[20] | LIU Y, HASHIMOTO S, NISHINO H, et al. Fabrication and charac-terization of a co-fired La0.6Sr0.4Co0.2Fe0.8O3-δ cathode-supported Ce0.9Gd0.1O1.95 thin-film for IT-SOFCs[J]. Journal of Power Sources, 2007, 164(1):56-64. |
[21] | CHEN X J, LIU Q L, CHAN S H, et al. High performance cathode-supported SOFC with perovskite anode operating in weakly humi-dified hydrogen and methane[J]. Electrochemistry Communicat-ions, 2007, 9(4):767-772. |
[22] | YAMAGUCHI T, SHIMIZU S, SUZUKI T, et al. Fabrication and characterization of high performance cathode supported small-scale SOFC for intermediate temperature operation[J]. Electrochemistry Communications, 2008, 10(9):1381-1383. |
[23] | MCINTOSH S, GORTE R J. Direct hydrocarbon solid oxide fuel cells[J]. Chemical Reviews, 2004, 104(10):4845-4865. |
[24] | SMITH R B, BAZANT M Z. Multiphase porous electrode theory[J]. Journal of the Electrochemical Society, 2017, 164(11):E3291-E3310. |
[25] | YANG C, CHENG J, HE H, et al. Ni/SDC materials for solid oxide fuel cell anode applications by the glycine-nitrate method[J]. Key Engineering Materials, 2010, 434-435(3):731-734. |
[26] | OH T S, YU A S, ADIJANTO L, et al. Infiltrated lanthanum stron-tium chromite anodes for solid oxide fuel cells:Structural and cat-alytic aspects[J]. Journal of Power Sources, 2014, 262:207-212. |
[27] | CHICK L A, PEDERSON L R, MAUPIN G D, et al. Glycine-nitrate combustion synjournal of oxide ceramic powders[J]. Materials Let-ters, 1990, 10(1/2):6-12. |
[28] | HUANG K, GOODENOUGH J B. A solid oxide fuel cell based on Sr-and Mg-doped LaGaO3 electrolyte:The role of a rare-earth oxide buffer[J]. Journal of Alloys and Compounds, 2000, 303-304:454-464. |
[29] | YOU H, ZHAO C, QU B, et al. Fabrication of Ni0.5Cu0.5Ox coated YSZ anode by hard template method for solid oxide fuel cells[J]. Jour-nal of Alloys and Compounds, 2016, 669:46-54. |
/
〈 |
|
〉 |