Inorganic Chemicals Industry >
Effect of composition on hydrogen storage characteristics of （La0.7Mg0.3）Nix alloy for vehicle
Received date: 2021-01-04
Online published: 2021-09-08
In order to develop rare earth magnesium based hydrogen storage alloys with high cycle life and high hydrogen storage performance for new energy vehicles,the microstructure,phase composition and hydrogen storage properties of the cast and annealed ingot/rapidly quenched（La0.7Mg0.3）Nix（x=2.0,2.5,3.0） hydrogen storage alloys were investigated.The results showed that when x=2.5,the hydrogen storage alloy prepared by rapid quenching had good hydrogen absorption and desorption plateau pressure,and the complete dehydrogenation characteristic was shown in the PCT curve,and the hydrogen absorption capacity was about 1.44%（mass fraction）.After annealing at 850~950 ℃,the hydrogen absorption and desorption plateau of（La0.7Mg0.3）Ni2.5 hydrogen storage alloy prepared by ingot method was higher and wider than that of（La0.7Mg0.3）Ni2.0 hydrogen storage alloy,which indicated that the former had relatively better hydrogen absorption and desorption performance;the hydrogen absorption and desorption plateau pressure of（La0.7Mg0.3）Ni2.5 hydrogen storage alloy at different annealing temperatures was close.The hydrogen and dehydrogenation capacity could reach 1.6%（mass fraction）.The LaNi5 and（LaMg）Ni3 phases in （La0.7Mg0.3）Nix hydrogen storage alloys by ingot casting and rapid quenching would gradually transform into（LaMg）2Ni7 phase with the increase of annealing temperature.The surface powder particles of （La0.7Mg0.3）Ni2.5 hydrogen storage alloys prepared by ingot casting and rapid quenching were minimum at 950 ℃ and 900 ℃,respectively.
Key words： components; La-Mg-Ni alloy; phase; hydrogen storage property; micromorphology
Guangjian Shao , Kele Wang . Effect of composition on hydrogen storage characteristics of （La0.7Mg0.3）Nix alloy for vehicle[J]. Inorganic Chemicals Industry, 2021 , 53(9) : 51 -56 . DOI: 10.19964/j.issn.1006-4990.2020-0642
| [1] | 孙欣, 阚洪敏, 魏晓冬, 等. 镁基储氢合金制备技术的研究进展[J]. 化工新型材料, 2019, 47(11):232-235,240. |
| [2] | Jiang M, Li Z Q, Liu J S, et al. Influence of Mo on microstructure and electrochemical properties of A2B7-type La-Mg-Ni hydrogen storage electrode alloy[J]. Journal of Materials Engineering, 2014(9):100-105. |
| [3] | 丁鑫, 陈瑞润, 陈晓宇, 等. 镁基储氢合金吸放氢机理及组织与性能调控[J]. 自然杂志, 2020, 42(3):179-186. |
| [4] | Xiao F, Ji R, Ma R, et al. The compressibility of the La-Mg-Ni alloy system[J]. International Journal of Hydrogen Energy, 2010, 35(13):6779-6783. |
| [5] | Zhang P L, Song X P, Wang X L, et al. Effect of rapid quenching on the microstructure and electrochemical characteristics of La0.6Ce0.4Ni3.6Co0.65Mn0.4Al0.2Ti0.05(FeB)0.1 hydrogen storage alloy[J]. Rare Metals, 2010, 29(6):583-596. |
| [6] | 杨立峰, 陆行, 肖方敏, 等. Mg基储氢合金的合金化与储氢性能[J]. 特种铸造及有色合金, 2018, 38(10):1151-1154. |
| [7] | Wang Y, Wang L, Hou Z, et al. Effects of Nd-doping on the structure and electrochemical properties of Li3V2（PO4）3/C synthesized using a microwave solid-state route[J]. Solid State Ionics, 2014, 261:11-16. |
| [8] | 宋云波, 赵欣. 新能源汽车用Mg2Ni基储氢合金的制备与性能[J]. 电源技术, 2020, 44(2):186-191. |
| [9] | 史云斌, 黄瑞. 混合动力汽车用镁基储氢合金制备与性能研究[J]. 铸造技术, 2018, 39(2):302-305. |
| [10] | Sakai T, Ozaki T, Kanemoto M, et al. Stacking structures and elect-rode performances of rare earth-Mg-Ni-based alloys for advanced nickel-metal hydride battery[J]. Journal of Alloys & Compounds, 2007, 446(5):620-624. |
| [11] | 王旭凤, 刘建. 掺杂金属氧化物对Mg基储氢合金性能的影响[J]. 稀土, 2018, 39(5):122-134. |
| [12] | Shen W, Han S, Li Y, et al. Electrochemical performance of polya-niline electroless deposited La-Mg-Ni-based hydrogen storage alloys[J]. Materials Chemistry & Physics, 2012, 132(2/3):852-857. |
/
| 〈 |
|
〉 |