Research & Development

Research on preparation process of water-soluble ammonium polyphosphate with high polymerization rate

  • Yong Chen ,
  • Sanke Yang ,
  • Tian Xie ,
  • Shaocheng Tao ,
  • Qinglan Long ,
  • Xu Liu
Expand
  • 1.School of Chemistry and Chemical Engineering,Guizhou University,Guiyang 550025,China;
    2.Wengfu(Group) Co.,Ltd.;
    3.National Key Laboratory of Efficient Utilization of Low Grade Phosphate Rock and its Associated Resources

Received date: 2019-11-28

  Online published: 2020-05-21

Abstract

The water-soluble ammonium polyphosphate with high polymerization rate was prepared by using wet process phos-phoric acid and urea as raw materials.The effects of amount-of-substance ratio of urea to phosphoric acid,polymerization tem-perature and polymerization time on the polymerization rate of ammonium polyphosphate were investigated.The optimum pro-cess conditions were as follows:the amount-of-substance ratio of urea to phosphoric acid was 1.4,the polymerization temper-ature was 180 ℃ and the polymerization time was 1.0 h.Under the optimal conditions,the polymerization rate of the obtained product was 98.20%,the mass fraction of phosphorus pentoxide was 63.33% and the mass fraction of nitrogen was 13.85%. the water solubility was good,and the crystal form of ammonium polyphosphate was analyzed by XRD as type Ⅰ ammonium polyphosphate.

Cite this article

Yong Chen , Sanke Yang , Tian Xie , Shaocheng Tao , Qinglan Long , Xu Liu . Research on preparation process of water-soluble ammonium polyphosphate with high polymerization rate[J]. Inorganic Chemicals Industry, 2020 , 52(5) : 50 -52 . DOI: 10.11962/1006-4990.2019-0344

References

[1] 兰国志, 顾丽莉, 明大增 , 等. 水溶性聚磷酸铵合成技术最新研究进展[J]. 化工科技, 2016,24(2):64-66.
[2] 杨蕾, 胡兆平, 刘永秀 , 等. 低聚合度聚磷酸铵合成方法及其应用概述[J]. 山东化工, 2016,45(23):53-54.
[3] 郑福林, 刘代俊, 陈建钧 . 农用聚磷酸铵的制备与表征[J]. 无机盐工业, 2017,49(2):28-30.
[4] 亢龙飞, 褚贵新 . 聚磷酸铵肥料生产工艺及其关键性状表征[J]. 磷肥与复肥, 2018,33(9):13-18.
[5] 王连祥 . 新型肥料聚磷酸铵生产技术与应用初探[J]. 化肥工业, 2008(4):16-17.
[6] 焦立强, 汤建伟, 化全县 , 等. 聚磷酸铵的研发、生产及应用[J]. 无机盐工业, 2009,41(4):4-7.
[7] 李成志, 胡兆平, 刘永秀 , 等. 磷酸尿素法合成聚磷酸铵聚合率影响因素的探讨[J]. 磷肥与复肥, 2019,34(1):7-9.
[8] 徐保明, 徐思思, 唐强 , 等. 水溶性聚磷酸铵的合成工艺进展[J]. 无机盐工业, 2017,49(4):5-8.
[9] 吴华东, 陈华, 张林锋 , 等. 聚磷酸铵的合成、改性及应用研究进展[J]. 无机盐工业, 2018,50(2):8-12.
[10] 王伯通, 刘永秀, 李成志 , 等. 离子色谱法测定水溶性聚磷酸铵中聚合态磷的含量[J]. 磷肥与复肥, 2016,31(2):33-34.
[11] 王蕾, 杨依彬, 涂攀峰 , 等. 离子交换分离法测定聚磷酸铵中不同形式的磷酸盐[J]. 磷肥与复肥, 2014,29(5):62-63.
Outlines

/