MXene@CS复合絮凝剂的制备及其对刚果红去除的研究
收稿日期: 2020-06-18
网络出版日期: 2020-12-15
基金资助
国家自然科学基金(51779230);国家自然科学基金(51509223);河南省高等学校重点科研项目(18B610008);河南省高等学校重点科研项目(19A610010);河南省重点研发与推广专项(182102311033);国家博士后基金面上项目(2018M632799)
Synthesis of MXene@CS composite flocculant and its application in removal of Congo red dye from aqueous solution
Received date: 2020-06-18
Online published: 2020-12-15
壳聚糖(CS)因具有大量的羟基和氨基,可为吸附色素污染物提供较多活性位点,但其在酸性条件易于溶解。MXene可为CS提供支撑位点,从而构建新型MXene@CS复合材料。研究构建了新型Ti3C2TX@CS有机无机复合材料,并应用于刚果红的去除研究。通过对Ti3C2TX@CS的微观形貌、晶体结构、表面官能团等进行表征分析,发现Ti3C2TX@CS的复合过程为物理复合。絮凝实验结果表明:在Ti3C2TX@CS投加量为30 mg、溶液pH为9、反应时间为30 min、温度为25~60 ℃条件下,Ti3C2TX@CS对50 mL质量浓度为500 mg/L刚果红(CR)溶液的脱色率达到99%以上。通过实验结果和反应前后Ti3C2TX@CS电位变化推断,Ti3C2TX@CS对刚果红的去除机理主要是电中和作用和吸附架桥作用。
关键词: Ti3C2TX@CS; 刚果红; 絮凝剂; 脱色率
南岚 , 连超群 , 耿慧凯 , 张伟 , 万红友 . MXene@CS复合絮凝剂的制备及其对刚果红去除的研究[J]. 无机盐工业, 2020 , 52(12) : 59 -63 . DOI: 10.11962/1006-4990.2020-0044
Chitosan(CS) has a large number of hydroxyl and amino groups,which can provide more active sites for adsorption of pigment pollutants,but it was easy to dissolve in acidic conditions.MXene could provide support sites for CS,thereby constructing a new type of MXene@CS composite material.A new type of Ti3C2TX@CS organic-inorganic composite was synt-hesized and applied in the removal of Congo red(CR).The Ti3C2TX@CS composite was proven to be physically compounded through the micromorphology,crystal structure and surface functional group analysis data.The experimental results showed that the decolorization rate of CR solution(500 mg/L) by synthesized Ti3C2TX@CS could exceed 99% at Ti3C2TX@CS dose of 30 mg,pH of 9,and reaction time of 30 min and the temperature range at 25~60 ℃.The experimental results and the change of Ti3C2TX@CS potential before and after the reaction were used to infer the Ti3C2TX@CS to Congo red.The removal mecha-anism is the action of electrical neutralization and adsorption bridging.
Key words: Ti3C2TX@CS; Congo red(CR); flocculant; decolorization rate
[1] | Halim J, Kota S, Lukatskaya M R, et al. Synjournal and characteriza-tion of 2D molybdenum carbide(MXene)[J]. Advanced Functional Materials, 2016,26(18):3118-3127. |
[2] | Lin H, Wang Y, Gao S, et al. Theranostic 2D tantalum carbide (MXene)[J]. Advanced Materials, 2018,30(4):1703284. |
[3] | Kurra N, Alhabeb M, Maleski K, et al. Bistacked titanium carbide (MXene) anodes for hybrid sodium-ion capacitors[J]. ACS Energy Letters, 2018,3(9):2094-2100. |
[4] | Xiu L, Wang Z, Yu M, et al. Aggregation-resistant 3D MXene-based architecture as efficient bifunctional electrocatalyst for overall water splitting[J]. ACS Nano, 2018,12(8):8017-8028. |
[5] | Sinha A, Zhao H, Huang Y, et al. MXene:An emerging material for sensing and biosensing[J]. TrAC Trends in Analytical Chemistry, 2018,105:424-435. |
[6] | Sun S, Liao C, Hafez A M, et al. Two-dimensional MXenes for energy storage[J]. Chemical Engineering Journal, 2018,338:27-45. |
[7] | Lee C S, Robinson J, Chong M F. A review on application of floccu-lants in wastewater treatment[J]. Process Safety and Environmental Protection, 2014,92(6):489-508. |
[8] | 高群, 王国建, 李文涛. 壳聚糖在稀溶液中的分子构象及其影响因素[J]. 化学通报, 2009(4):340. |
[9] | Ying Y, Liu Y, Wang X, et al. Two-dimensional titanium carbide for efficiently reductive removal of highly toxic chromium (Ⅵ) from water[J]. ACS Applied Materials & Interfaces, 2015,7(3):1795-1803. |
[10] | 彭超. 二维过渡金属碳化物(MXene)基光催化剂的制备、性能与催化机理研究[D]. 广州:华南理工大学, 2017. |
[11] | 任东文, 包德才, 王为, 等. N-乙酰化壳聚糖的FTIR和XRD研究[J]. 光谱学与光谱分析, 2006,26(7):1217-1220. |
[12] | Ding X, Li C, Li Y. Thermal stability and photocatalysis of a novel Two-dimensional MXene[J]. Chemical Engineering and Techno-logy, 2018,8(5):326-332. |
[13] | 胡娃萍. 高传热性有机相变材料的制备与性能研究[D]. 武汉:武汉理工大学, 2012. |
[14] | 周晓伟. Ti3C2TX的制备表征及其SERS应用研究[D]. 天津:天津大学, 2018. |
[15] | Pang H, Huang S, Wu Y, et al. Efficient elimination of U(Ⅵ) by polyethyleneimine-decorated fly ash[J]. Inorganic Chemistry Frontiers, 2018,5(10):2399-2407. |
[16] | 顾鹏程, 宋爽, 张塞, 等. 聚苯胺改性MXene复合材料对U(Ⅵ)的高效富集及机理研究[J]. 化学学报, 2018,76(9):701-708. |
[17] | Lin Y F, Ho J C, Lin K Y A, et al. A drying-free and one-step process for the preparation of siloxane/CS mixed-matrix membranes with outstanding ethanol dehydration performances[J]. Separation and Purification Technology, 2019,221:325-330. |
[18] | Pawlak A, Mucha M. Thermogravimetric and FTIR studies of chitosan blends[J]. Thermochimica Acta, 2003,396(1/2):153-166. |
[19] | 谢婷玉, 荆肇乾, 王郑, 等. 壳聚糖的絮凝性能及其在废水脱色处理中的应用[J]. 化工环保, 2016,36(4):381-385. |
[20] | 吴舒燕, 陈玉琼, 马腾香, 等. CTS-PFS复合型絮凝剂对印染废水的脱色研究[J]. 合成材料老化与应用, 2015(4):52-54. |
[21] | 童孟良, 王罗强. 染料废水的纳米二氧化钛/壳聚糖复合物处理[J]. 印染, 2015,41(17):41-43. |
[22] | 丁纯梅, 宋庆平, 王崇侠, 等. 壳聚糖对印染废水吸附性能的研究[J]. 环境与健康杂志, 2008,25(8):688-690. |
[23] | 仉春华, 王文君, 安晓雯, 等. 质子化壳聚糖的除磷性能[J]. 环境工程学报, 2013,7(2):568-572. |
/
〈 |
|
〉 |