无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ
研究与开发

响应曲面法优化聚合硫生产工艺参数

  • 魏兰
展开
  • 中石化南京化工研究院有限公司,江苏南京 210048
魏兰(1968— ),女,大学本科,高级工程师,长期从事硫与硫酸的设计与新技术研发;E-mail: njweilan@163.com

收稿日期: 2020-03-18

  网络出版日期: 2020-09-27

Response surface methodology for optimizing production process parameters of polysulfur

  • Lan Wei
Expand
  • Sinopec Nanjing Research Institute of Chemical Industry Co.,Ltd.,Nanjing 210048,China

Received date: 2020-03-18

  Online published: 2020-09-27

摘要

以硫磺为原料,采用低温熔融法制备了具有较好高温稳定性的聚合硫粉体。通过单因素实验研究了稳定剂类型、反应温度、反应时间和稳定剂用量对聚合硫高温稳定性和单程转化率的影响。在单因素实验基础上采用Box-Behnken Design(BBD)实验设计方法,利用Design-Expert软件建立反应温度、反应时间、稳定剂用量3个因素的影响规律,通过方差分析回归建立数学模型,预测和验证最优生产工艺。结果表明,在反应温度为246 ℃、反应时间为48.23 min、稳定剂用量为0.28%条件下,制备的聚合硫显示出较好的高温稳定性。

本文引用格式

魏兰 . 响应曲面法优化聚合硫生产工艺参数[J]. 无机盐工业, 2020 , 52(9) : 47 -51 . DOI: 10.11962/1006-4990.2019-0512

Abstract

Polymeric sulfur powder with good high temperature stability was prepared with sulfur as raw material by low tem-perature melting method.The effects of stabilizer type,reaction temperature,reaction time and stabilizer content on the high temperature stability and one-way conversion of polymeric sulfur were studied.On the basis of single-factor test,the Box-Behnken Design(BBD) experimental design method was used to find the effect rule of three factors,i.e.reaction temperature,reaction time and stabilizer content,with Design-Expert software.The mathematical model was established by variance analysis regression for prediction and verification of the optimal production process.The results showed that the better high temperature stability performance at temperature of 246 ℃,reaction time of 48.23 min and stabilizer content of 0.28% in the polymerization stage.

参考文献

[1] 侯宝军, 刘红研, 汪树军, 等. 混合萃取剂对不溶性硫黄萃取效果及高温稳定性的影响[J]. 橡胶工业, 2010,57(2):118-120.
[2] 杜孟成, 王维民. 不溶性硫黄的发展现状及评价方法[J]. 橡胶工业, 2015,62(5):312-317.
[3] 舒阳, 赵基钢, 王荣杰, 等. 影响测定不溶性硫磺热稳定性条件的研究[J]. 现代化工, 2016,36(5):183-185.
[4] 欧旭东. 不溶性硫磺合成方法及生产工艺研究进展[J]. 广东化工, 2009,36(7):97-100.
[5] Montgomery D C. Design and analysis of experiments[M]. 5th ed.New York:John Wiley and Sons, 2001.
[6] Mehta D, Kumar M H S,Sabikhi L.Development of high protein,high fiber smoothie as a grab-and-go breakfast option using respo-nse surface methodology[J]. Journal of Food Science and Techno-logy, 2017,54(12):3859-3866.
[7] Guvenc S Y, Erkan H S, Varank G, et al. Optimization of paper mill industry wastewater treatment by electrocoagulation and electro-Fenton processes using response surface methodology[J]. Water Science and Technology, 2017,76(8):2015-2031.
[8] Wang Z, Chen Q, Hu L, et al. Combined effects of binary antibiotic mixture on growth,microcystin production,and extracellular relea-se of Microcystis aeruginosa:Application of response surface metho-dology[J]. Environmental Science and Pollution Research, 2018,25(1):736-748.
[9] 欧阳福生, 毕玉晓, 李波, 等. 萃取剂分子结构对不溶性硫磺分离效果的影响[J]. 华东理工大学学报:自然科学版, 2008,34(4):482-486.
[10] 欧阳福生, 顾艳哲, 郝涛远. 不溶性硫磺的热稳定性研究[J]. 精细石油化工, 2015,32(6):41-46.
[11] 邱祖民, 陈益虎, 张玉英, 等. 不溶性硫磺的提纯及高温稳定性研究[J]. 南昌大学学报:理科版, 2002,26(2):103-105.
[12] 孙玉泉. 不溶性硫磺低温液相法制备工艺条件优化[J]. 化学工程师, 2011,25(11):49-53.
[13] 胡伟庆, 吴立报, 黄婉利, 等. 高热稳定性不溶性硫磺的制备及应用性能评价[J]. 石油化工高等学校学报, 2015,28(4):18-21.
[14] 李正西. 不溶性硫磺[J]. 硫磷设计与粉体工程, 2001,40(1):15-19.
[15] 李新华, 刘菊, 李冬男. 响应曲面法优化设计抗性淀粉膨化工艺的研究[J]. 食品工业科技, 2010(5):302-305.
[16] 周杰, 李世云, 李崇, 等. 曲面法优化超高强度钢的淬火工艺参数[J]. 重庆大学学报, 2013,36(5):37-43.
[17] 陈华国, 周洁, 周欣. 响应曲面法优化红布林中花青素提取工艺研究[J]. 贵州师范大学学报:自然科学版, 2018,36(3):23-28.
文章导航

/