机械涂覆技术在光催化材料制备中的应用进展
收稿日期: 2020-05-14
网络出版日期: 2020-08-12
基金资助
东莞市社会科技发展项目资助(2019507140843);东莞理工学院青年团队项目(TDQN2019003)
Application progress of mechanical coating technique in preparation of photocatalytic materials
Received date: 2020-05-14
Online published: 2020-08-12
陈立甲 , 陈海彬 , 李荣泳 . 机械涂覆技术在光催化材料制备中的应用进展[J]. 无机盐工业, 2020 , 52(8) : 1 -5 . DOI: 10.11962/1006-4990.2020-0263
Mechanical ball milling technique has attracted wide attention because of its simpler process and lower cost,it has a wide application prospect in the fields of mixing,refinement and alloying of powder materials.The present status of application of mechanical coating technique（MCT）developed from the principle of mechanical ball milling were summarized,including preparation of the functional coatings for surface modification of material and the thin films for photocatalytic degradation.The effects of process parameters,coating materials and coating substrate on the coatings′ thickness were analyzed. The unique advantages,such as simpler process,lower cost and formation of films on the spherical and other complex substrates,of this technique in the preparation of thin films were discussed.Based on the current research situation that uncontrollable films′ morphology,thickness and limited films′ substrate obtained from MCT,the future development direction of this technique was prospected aimed at expanding the types of films-forming substrate materials and accelerating the practical application of the thin films materials prepared by MCT.
Key words： mechanical coating technique; surface modification; coatings; photocatalysis; films
| [1] | Suryanarayana C. Mechanical alloying and milling[J]. Progress in Materials Science, 2001,46(1):1-184. |
| [2] | Romankov S, Sha W, Kaloshkin S D, et al. Fabrication of Ti-Al coa tings by mechanical alloying method[J]. Surface & Coatings Technology, 2006,201(6):3235-3245. |
| [3] | Komarov S V, Son S H, Hayashi N, et al. Development of a novel me thod for mechanical plating using ultrasonic vibrations[J]. Surface and Coatings Technology, 2007,201(16/17):6999-7006. |
| [4] | Romankov S, Kaloshkin S D, Hayasaka Y, et al. Effect of process pa rameters on the formation of Ti-Al coatings fabricated by mechani cal milling[J]. Journal of Alloys and Compounds, 2009,484(1/2):665-673. |
| [5] | 沈以赴, 李永灿, 陈成, 等. Al2O3陶瓷表面机械合金化制备铜涂层研究[J]. 南京航空航天大学学报, 2012,44(5):762-768. |
| [6] | 陈成. TC4钛合金表面机械合金化复合涂层的制备、组织控制及性能研究[D]. 南京:南京航空航天大学, 2017. |
| [7] | 卢丛阳. 机械合金化法制备金刚石/铜复合涂层的研究[D]. 南京:南京航空航天大学, 2019. |
| [8] | 张国鑫. 机械合金化制备镍基涂层工艺及性能研究[D]. 重庆:重庆理工大学, 2013. |
| [9] | Lu Y, Hirohashi M, Zhang S. Fabrication of oxide film by mechanical coating technique [C]//International Conference on Surfaces,Coatings and Nanostructured Materials:Aveiro,PORTUGAL, 2005. |
| [10] | Yoshida H, Lu Y, Hirohashi M. Fabrication of metallic titanium film by mechanical coating technique [C]//In Proceedings of the 5th International Forum on Advanced Material Science and Technology:Zhangjiajie,China, 2006. |
| [11] | Hao L, Lu Y, Sato H, et al. Fabrication of Sn coatings on alumina balls by mechanical coating technique and relevant process analysis[J]. Advanced in Materials Physics and Chemistry, 2012,2(4B):126-129. |
| [12] | Hao L, Lu Y, Sato H, et al. Fabrication of zinc coatings on alumina balls from zinc powder by mechanical coating technique and the process analysis[J]. Powder Technology, 2012,228:377-384. |
| [13] | Yoshida H, Lu Y, Nakayama H, et al. Fabrication of TiO2 film by mechanical coating technique and its photocatalytic activity[J]. Journal of Alloys and Compounds, 2009,475(1/2):383-386. |
| [14] | Ding D, Zhou B, Fu W Y, et al. Varied crystalline orientation of anatase TiO2 nanotubes from[101] to [001] promoted by 6TiF ions and their enhanced photoelectrochemical performance[J]. J.Mater.Sci., 2018,53(5):3332-3340. |
| [15] | Deng X Y, Zhang H X, Guo R N, et al. Effect of Ti3+ on enhancing photocatalytic and photoelectrochemical properties of TiO2 nanorods/nanosheets photoelectrode[J]. Sep.Purif.Technol., 2018,192:329-339. |
| [16] | Seadira TWP, Sadanandam G, Ntho T, et al. Preparation and characterization of metals supported on nanostructured TiO2 hollow spheres for production of hydrogen via photocatalytic reforming of glycerol[J]. Appl.Catal.B, 2018,222:133-145. |
| [17] | 李大玉, 张文韬, 张超. 不同种类金属掺杂改性TiO2材料光催化性能的研究进展[J]. 材料导报, 2019,33(23):3900-3907. |
| [18] | 朱佳新, 熊裕华, 郭锐. 二氧化钛光催化剂改性研究进展[J]. 无机盐工业, 2020,52(3):23-27. |
| [19] | Lu Y, Yoshida H, Nakayama H, et al.Formation of TiO2/Ti composite photocatalyst film by 2-step mechanical coating technique[J].Mater.Sci.Forum, 2011,675/676/677:1229-1232. |
| [20] | Lu Y, Hao L, Toh K, et al. Fabrication of TiO2/Cu composite photocatalyst thin film by two step mechanical coating technique and its photocatalytic activity[J].Adv.Mater.Res., 2012,415/416/417:1942-1948. |
| [21] | Hao L, Guan S J, Lu Y, et al. Surface topography evolution of TiO2/SnO2 coatings during thermal oxidation of Ti/Sn composite coatings[J]. Surface and Coatings Technology, 2016,291:325-333. |
| [22] | Guan S J, Hao L, Hiroyuki Yoshida, et al. Fabrication and characterization of photocatalyst composite coatings of TiO2/TiC-Ti using Ti and TiC powders[J]. Surface & Coatings Technology, 2016,307:627-632. |
| [23] | Guan S J, Lu Y, Hao L, et al. Influence of oxidation conditions on photocatalytic activity of Cr-TiO2 coatings by mechanical coating technique [C]//In Proceedings of the 9th International Forum on Advanced Material Science and Technology(IFAMST 9):Xiamen,China, 2014. |
| [24] | Zhang G Y, Tang X X, Chen X L, et al. The Effects of the content of NiO on the microstructure and photocatalytic activity of the NiO/TiO2 composite film[J]. Materials Science/Medziagotyra, 2018,24(4):372-375. |
| [25] | Hao L, Guan S J, Takaya S, et al. Preparation of visible-light-responsive TiO2 coatings using molten KNO3 treatment and their photocatalytic activity[J]. Applied Surface Science, 2017,407:276-281. |
| [26] | Guan S J, Hao L, Hiroyuki Yoshida, et al. Influence of carbon atmosphere on surface morphology and photocatalytic activity of TiO2 coatings by multi-heat treatment[J]. Journal of Materials Science Materials in Electronics, 2016,27(4):3873-3879. |
| [27] | Hao L, Lu Y, Hiroshi A, et al. The influence of the processing parameters on the formation of iron thin films on alumina balls by mechanical coating technique[J]. Journal of Materials Processing Technology, 2012,212(5):1169-1176. |
| [28] | Hao L, Lu Y, Sato H, et al. Influence of metal properties on the for mation and evolution of metal coatings during mechanical coating[J]. Metallurgical & Materials Transactions A, 2013,44(6):2717-2724. |
| [29] | 吴浩. 激光烧结制备β-FeSi2热电材料的研究[D]. 武汉:华中科技大学, 2012. |
| [30] | 吴开霞, 查五生, 唐鑫鑫, 等. 氧化锆球体表面机械球磨涂覆钛涂层工艺研究[J]. 粉末冶金技术, 2019,37(6):444-450. |
| [31] | Allen L C. Electronegativity is the average one-electron energy of the valence-shell electrons in ground-state free atoms[J]. Journal of the American Chemical Society, 1989,111(25):9003-9014. |
| [32] | Lü L, Lai M O, Zhang S. Modeling of the mechanical-alloying process[J]. Journal of Materials Processing Technology, 1995,52(2/3/4):539-546. |
| [33] | Hao L, Yoshida H, Itoi T, et al. Preparation of metal coatings on steel balls using mechanical coating technique and its process an alysis[J]. Coatings, 2017,7(4):53.Doi: 10.3390/coatings7040053. |
/
| 〈 |
|
〉 |
