脱硫石膏热处理制备注浆成型模具
收稿日期: 2019-08-10
网络出版日期: 2020-02-26
基金资助
国家自然科学基金青年基金项目(51302135)
Heat treatment of FGD gypsum and preparation of molds for slip casting
Received date: 2019-08-10
Online published: 2020-02-26
边成利 , 时焕岗 , 包文运 , 张东平 . 脱硫石膏热处理制备注浆成型模具[J]. 无机盐工业, 2020 , 52(2) : 54 -57 . DOI: 10.11962/1006-4990.2019-0189
Limestone-gypsum wet flue gas desulfurization（FGD） technology takes limestone as raw material to absorb SO2 from flue gas and obtain gypsum.While controlling SO2 emission,the treatment and comprehensive utilization of FGD gypsum are also very important.FGD gypsum was used as raw material to analyze the composition and carried out by heat treatment,and the effect of heat treatment process on the physical properties of gypsum was characterized.The heat treated gypsum was used in the manufacture of gypsum mould,and the anode support of solid oxide fuel cell was finally prepared.The fuel cell test results showed that FGD gypsum can be used for the preparation of tubular solid oxide fuel cells.
Key words： FGD gypsum; heat treatment; slip casting; solid oxide fuel cell
| [1] | 国家统计局. 2018年全国年度统计公报[OL]. [2019-02-28] |
| [2] | 赵龙广, 艾勇 . 火电厂脱硫石膏的产生与利用现状[J]. 科技视界, 2017(7):209-210. |
| [3] | 杨冬蕾, 杨再银 . 我国脱硫石膏的综合利用现状[J]. 硫酸工业, 2018,288(9):10-14. |
| [4] | Wang Jinman, Yang Peiling . Potential flue gas desulfurization gypsum utilization in agriculture:A comprehensive review[J]. Renewable and Sustainable Energy Reviews, 2017,82:1969-1978. |
| [5] | 徐雪锋 . 浅谈坭兴陶注浆成型工艺[J]. 陶瓷科学与艺术, 2014,48(9):23-23. |
| [6] | 丁子晔, 王晓刚, 邓丽荣 . 注浆成型B4C/SiC复相陶瓷的工艺及性能研究[J]. 中国陶瓷, 2016(8):62-67. |
| [7] | Pedre?o-Rojasa M A, Flores-Colen I, de Brito J , et al. Influence of the heating process on the use of gypsum wastes in plasters: Mech-anical,thermal and environmental analysis[J]. Journal of Cleaner Production, 2019,215:444-457. |
| [8] | Hanifi A R, Torabi A, Etsell T H , et al. Porous electrolyte-supported tubular micro-SOFC design[J]. Solid State Ionics, 2011,192(1):368-371. |
| [9] | 刘丹丹, 谢永敏, 刘江, 王金霞 . NiO-YSZ-石墨水系浆料的研制及其在注浆成型制备固体氧化物燃料电池中的应用[J]. 物理化学学报, 2014(2):331-337. |
| [10] | 刘科 . 多孔陶瓷支撑型固体氧化物燃料电池研究[D]. 哈尔滨:哈尔滨工业大学, 2011. |
| [11] | Yang Binbin, Ran Ran, Zhong Yijun , et al. A carbon-air battery for high power generation[J]. Angewandte Chemie International Edi-tion, 2015,54(12):3722-3725. |
| [12] | 李亮 . 利用脱硫石膏制备发泡轻质材料的研究[J]. 无机盐工业, 2018,50(11):53-56. |
| [13] | 张凡凡, 陈超, 张西兴 , 等. 不同来源石膏的性能特点与应用分析[J]. 无机盐工业, 2017,49(8):10-13. |
/
| 〈 |
|
〉 |
