无机盐工业
主管:中海油天津化工研究设计院有限公司
主办:中海油天津化工研究设计院有限公司
   中海油炼油化工科学研究院(北京)有限公司
   中国化工学会无机酸碱盐专业委员会
ISSN 1006-4990 CN 12-1069/TQ

无机盐工业 ›› 2025, Vol. 57 ›› Issue (2): 83-91.doi: 10.19964/j.issn.1006-4990.2024-0046

• 研究与开发 • 上一篇    下一篇

纳米碳酸钙掺杂纤维素基水凝胶制备及其对铜离子吸附性能研究

白星星1(), 李韩飞1, 汤勇1, 张俊1, 朱广凯1, 李立硕1,2(), 童张法1,2   

  1. 1.广西大学化学化工学院,广西 南宁 530004
    2.广西石化资源加工及过程强化 技术重点实验室,广西 南宁 530004
  • 收稿日期:2024-01-24 出版日期:2025-02-10 发布日期:2025-02-20
  • 通讯作者: 李立硕(1974— ),副教授,硕士生导师,研究方向为无机材料;E-mail:li_lishuo@163.com
  • 作者简介:白星星(1999— ),女,硕士研究生,研究方向为无机材料;E-mail:1975693195@qq.com
  • 基金资助:
    广西石化资源加工及过程强化技术重点实验室项目(2020Z007)

Study on preparation of cellulose based hydrogel doped with nano-calcium carbonate and its adsorption properties of copper ions

BAI Xingxing1(), LI Hanfei1, TANG Yong1, ZHANG Jun1, ZHU Guangkai1, LI Lishuo1,2(), TONG Zhangfa1,2   

  1. 1.College of Chemistry and Chemical Engineering of Guangxi University,Nanning 530004,China
    2.Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology,Guangxi University,Nanning 530004,China
  • Received:2024-01-24 Published:2025-02-10 Online:2025-02-20

摘要:

天然纤维素基水凝胶具有较强的吸附性能,是一种去除重金属离子的优良吸附剂,但凝胶强度较弱。通过自由基聚合反应,将丙烯酸(AA)、丙烯酰胺(AM)接枝在羧甲基纤维素钠(CMC)上,并进一步将自制的纳米碳酸钙(NCC)掺杂到纤维素水凝胶中,成功制备了NCC/CMC复合水凝胶。抗压性能测试结果表明,当NCC质量分数为2.5%、最大应变为80%时,最大应力为48.52 kPa,经20次循环后仍可达39.64 kPa。采用SEM、FT-IR、XRD和N2吸附-脱附等实验对水凝胶形貌和结构进行表征分析,结果表明复合水凝胶具有丰富的表面多孔结构,比表面积为7.775 m²/g,属于介孔材料。考察了pH、铜离子溶液初始质量浓度和温度等因素对铜离子吸附量的影响。结果表明,当铜离子溶液pH为5.5、温度为30 ℃、铜离子溶液初始质量浓度为150 mg/L时,对铜离子的最大吸附量达到178 mg/g,吸附容量较CMC水凝胶提高了30 mg/g,吸附过程符合Langmuir吸附等温模型和准二级动力学模型。经过5次连续的吸附-脱附后,复合水凝胶仍具有良好的再生性能。

关键词: 水凝胶, 羧甲基纤维素钠, 纳米碳酸钙, 吸附机制, 铜离子

Abstract:

Natural cellulose-based hydrogels have strong adsorption properties and are excellent adsorbent for removing heavy metal ions,but hydrogels strength is weak.Through free radical polymerization,acrylic acid(AA) and acrylamide(AM) were grafted onto sodium carboxymethyl cellulose(CMC),and further self-made nano-calcium carbonate(NCC) was doped into the cellulose hydrogel,successfully preparing NCC/CMC composite hydrogel.The pressive performance test results showed that the maximum stress was 48.52 kPa when the maximum strain was 80% and the mass fraction of NCC was 2.5%,and it still reached 39.64 kPa after 20 cycles.The morphology and structure of the hydrogel were characterized using SEM,FT-IR,XRD,and N2 adsorption-desorption test.The results showed that the composite hydrogel had an abundant surface porous structure with a specific surface area of 7.775 m2/g,which was belonged to mesoporous materials.The effects of pH,initial mass concentration of copper ion solution,and temperature on the adsorption amount of copper ions were investigated.The results showed that when the pH of the copper ion solution was 5.5,the temperature was 30 ℃,and the initial mass concentration of the copper ion solution was 150 mg/L,the maximum adsorption capacity of NCC/CMC composite hydrogel for copper ions reached 178 mg/g,and the adsorption capacity was 30 mg/g higher than that of CMC hydrogel.The adsorption process was followed the Langmuir model and the Pseudo-second order.After 5 consecutive adsorption-desorption cycles,the composite hydrogel still has good regeneration performance.

Key words: hydrogel, sodium carboxymethyl cellulose, nano-calcium carbonate, adsorption, Cu2+

中图分类号: