INORGANICCHEMICALSINDUSTRY ›› 2010, Vol. 0 ›› Issue (4): 0-0.
Li Yongmei,Shen Xiaodong,Cui Sheng,Yi Xibin
Online:
Published:
Abstract: <FONT face=Verdana>To obtain composite material with low infrared emissivity and laser reflectivity,nano-composite ZAO/SmBO3 particles with good composite effect and with relatively low infrared emissivity and laser reflectivity were prepared by compounding aluminum zinc oxide (ZAO) onto the surface of samarium borate (SmBO3).ZAO-coated SmBO3 nano-composite powder was prepared by coprecipitation method.From the picture of SEM,it was found that the thickness of coating is about 250 nm.Influences of the factors,such as m(SmBO3)∶m(ZnO),concentration of HCl,and calcination temperature,on infrared emissivity and laser reflectivity during the coating process were investigated.Results showed that when m(SmBO3)∶m(ZnO)was 1.5∶[KG-*2]1,concentration of HCl was 0.4 mol/L,and calcination temperature was 650 ℃,the infrared emissivity and laser reflectivity were the lowest.The lowest infrared emissivity and laser reflectivity were 0.70 and 0.73%,respectively.</FONT>
Li Yongmei;Shen Xiaodong;Cui Sheng;Yi Xibin. Preparation and characterization of aluminum zinc oxide coated samarium borate nano-composite powder[J]. INORGANICCHEMICALSINDUSTRY, 2010, 0(4): 0-0.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: http://www.wjygy.com.cn/EN/
http://www.wjygy.com.cn/EN/Y2010/V0/I4/0